Cabling And Startup For A Single User - Motorola Communications Gateway User Manual

Introduction Before You Begin
Coax connector
Home Print
Installation & Configuration

Cabling and Startup for a Single User

Allow 5 to 30 minutes to power up the first time because the Motorola Communications
To cable outlet
Gateway must find and lock on the appropriate channels for communications.
or splitter
1
Be sure your computer is on and the Communications Gateway is unplugged.
2
Connect one end of the coaxial cable to the cable outlet or splitter.
3
Connect the other end of the coaxial cable to the Coax connector on the
Communications Gateway.
4
Hand-tighten the connectors to avoid damaging them.
5
Insert the Motorola Communications Gateway CD-ROM into your CD-ROM drive.
X
Exit
Troubleshooting
13
Communications Gateway User Guide
FAQ Glossary
License