Registering Your New Camera - Motorola SD7550 User Manual

Registering Your New Camera

Before you can use your new wireless camera, you must register it to your base
unit. SD7500 Series base units allow you to register up to 12 devices (e.g.,
handsets, cameras, cell docks), and use up to four devices at one time.
To register a new camera:
1. Ensure that your camera is plugged into an electrical outlet.
2. Press and hold the
approximately four seconds or until the LED turns red and flashes quickly.
3. Press and hold the base unit's
approximately four seconds, or until the base unit's
When the registration is complete, the camera's LED is solid green.
button on the camera. Release the button after
PAGE
button. Release the button after
PAGE
LED flashes.
IN USE
9 9