Standard System Configuration; Additional Software And Documentation - Bosch 1200 Series Quick Installation Manual

1200/1400 Series as standard iSCSI disk array
2.
To restart the service, on the Bosch VRM Appliance initial configuration window, click the
enable Bosch VRM Appliance link.
5

Standard System Configuration

The system is delivered with the fully configured iSCSI target and preconfigured LUNs.
1200 Series/4-bay
1400 Series/4-bay
1400 Series/8-bay
The default target name is TG0 and holds all of the iSCSI LUNs.
The naming convention for the LUNs is VHDxx.vhd where <xx> ranges from 01 up to 08
depending on the system used. The default setup allows every iSCSI Initiator to connect to
the system.
The system comes with iSCSI Target Service enabled which is used by the preinstalled VRM
application.
6

Additional Software and Documentation

For further information concerning DLA disk array series with VRM, see the following manuals:
–
–
–
The manuals can be found on:
www.boschsecurity.com > select your region and your country > select Product Catalog >
start a search for your product > select the product in the search results to show the existing
documents.
Bosch Sicherheitssysteme GmbH
Select the link Disable/Enable Bosch VRM Appliance to stop/start the VRM recording
service.
Quick Installation Guide 1200 Series/4-bay IP Video Storage System
Quick Installation Guide 1400 Series/4-bay IP Video Storage System
Quick Installation Guide 1400 Series/8-bay IP Video Storage System
Quick Installation Guide
preconfigured LUNs
4
3
8
Standard System Configuration | en
- | V1 | 2011.02
9