Advertisement
8
8
Attach the water supply tank.
●
Push the water supply tank into the main
unit until it clicks.
9
9
Wipe off any water from the appliance.
●
Remove all the water in the water supply tank and main
unit when not using the main unit for extended periods
of time (several weeks or more). Store the main unit
only after sufficiently drying the main unit.
nanoe™ mode
What is nanoe™?
(nanoe™ generation method: High‑voltage discharge)
nanoe™ is charged fine water particles, generated by
applying high voltage in order to split water. It cannot be
seen with the naked eye. Since nanoe™ is generated by
collecting water in the air, it may be difficult to generate in
certain cases depending on the environment.
(It is harder to collect water in the air when it is cold and
humidity is low.)
How to use with the nanoe™ mode
●
In the nanoe™ mode, nanoe™ is generated using
moisture collected from the air, so a water supply is not
required. (Water in the water supply tank will not be
depleted).
●
You can use the nanoe™ mode without opening the cover.
6
EH-SA60_CH.indb
36
2011/06/29
18:17:58
Advertisement
