Samsung HT-J7500W User Manual page 12

Connections
If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic
✎
field.
Place the wireless receiver module at the rear of the listening position. If the wireless receiver module
✎
is too close to the product, sound from the speakers may be disrupted because of interference.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth device, or any other
✎
device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be
disrupted because of interference.
The maximum transmission distance from the product to the wireless receiver module is about 10m,
✎
but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is
between the product and the wireless receiver module, the system may not operate at all, because
the radio waves cannot penetrate metal.
If the product doesn't make a wireless connection, you need to run an ID Set between the product
✎
and wireless receiver module. With the product turned off, press and hold
remote control for 5 seconds. Turn on the wireless receiver module. Then, press and hold the "Id
SET" button on the back of the wireless receiver module for 5 seconds, and then turn the product
on.
| CAUTION |
If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall
▶
wherever you want to hang a speaker, and then, using the hole in the rear of each speaker, carefully
hang each speaker on a screw or nail.
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
▶
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
▶
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands
▶
or alien substances into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall by the duct (hole).
▶
The wireless receiving antenna is built into the wireless receiver module. Keep it away from water
▶
and moisture.
For optimal listening performance, make sure that the area around the wireless receiver module
▶
location is clear of any obstructions.
In 2-CH mode, you will hear no sound from the wireless surround speakers.
▶
12
- English
(MUTE) button on the