Lock & Unlock Keypad - Motorola Q Owner's Manual

4 Choose either a simple password (4-digit
number) or strong numeric (a
hard-to-guess numeric PIN) password
type.
5 Enter and confirm your password. Press
the ALT key ( ) to switch to numeric
mode.
Note: When you choose a password, it can
only be a numeric value.
6 Press Done.
To unlock the phone, press Unlock. When the
unlock screen displays, enter your password
and press Done.
Tip: Be certain to remember your
password. Without your password, you can
reset your phone, but it will result in the loss
of your personalized settings and all content
stored in phone memory. To perform a hard
reset, hold down the center select key (s) for
5 seconds while turning the phone on.
Note: You can make emergency calls on a
locked phone (see page 68). A locked phone
still rings or vibrates for incoming calls or
messages, but you DO NOT need to unlock
it to answer a call.
security auto phone lock
To enable an automatic phone lock, where
your phone automatically locks after a
specified time, use auto phone lock.
Find it: On the Home Screen, press Start >
Settings > Security > Enable Phone Lock
lock & unlock keypad
Press and hold the Home key (Y). When the
Quick List displays, highlight and select Key
essentials 17