Related Manuals for Sony URX-M2
Summary of Contents for Sony URX-M2
-
Page 1: Operating Instructions
4-567-049-01 (1) Diversity Tuner Module Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. URX-M2 © 2014 Sony Corporation... -
Page 2: Table Of Contents
Parts Identification ......4 Power Supply ......... 5 Attachment and Installation Procedures ........5 Installing a diversity tuner module (URX-M2) ....... 5 Operation ........7 If noise is heard ....... 7 Tuner Settings ........ 8 Setting the reception channel ........8 Selecting the channels on multiple tuners automatically .... -
Page 3: Configuration Of The Packages
Configuration of Features the Packages This tuner (diversity tuner module (URX-M2)) is a tuner module that can be incorporated into an MB-X6 Tuner Base Unit, SRP-X500P Powered Mixer, or Diversity tuner module (URX-M2) (1) similar device. The combination of the diversity tuner... -
Page 4: Parts Identification
B AF (audio frequency) indication Parts Appears whenever the output audio signal is stronger than the reference level. Identification C GP (group)/CH (channel) indication Shows the reception channel group and channel number. Each time you press the SET button, the channel indication changes as follows. -
Page 5: Power Supply
Installing a diversity tuner module (URX-M2) Notes • Before installing the diversity tuner module (URX-M2), make sure the unit into which the tuner module will be installed is turned off. Do not install or uninstall the tuner module while the unit... - Page 6 To install a diversity tuner To install a diversity tuner module (URX-M2) into the module (URX-M2) into the optional MB-X6 Tuner Base optional SRP-X500P Powered Unit Mixer The MB-X6 Tuner Base Unit (not supplied) The SRP-X500P Powered Mixer (not can accommodate up to 6 diversity tuner supplied) can accommodate up to two modules (URX-M2).
-
Page 7: Operation
If noise is heard Operation Depending on the environment where the unit is installed, external noise or radio waves may disrupt transmission on certain Make all necessary connections on the channels. tuner. When selecting a channel under these circumstances, turn off the transmitter. For examples of connections, see “System Then, on the tuner, select a channel for Configurations”... -
Page 8: Tuner Settings
Setting the reception channel Refer to the pdf files “Sony Wireless Microphone System Frequency List” on the supplied CD-ROM for details on the selectable channel groups and channels. Press the + or – button to select the Press down the SET button for more channel number. -
Page 9: Selecting The Channels On Multiple Tuners Automatically
Press the SET button repeatedly until the frequency indication appears and When multiple diversity tuner modules starts flashing. (URX-M2) are installed into the MB-X6 to perform simultaneous multiple-channel operation, select the channel group on the tuner module installed into the slot 1 of... -
Page 10: Transmitter Settings
• When there are unavailable channels due to extraneous radio wave and the channel could not be selected on some tuner When using the URX-M2 in conjunction modules, “NO CH” appears on the with the UTX-M03, be sure to configure the display of those tuner modules. - Page 11 Setting the menu display mode (MENU MODE) Press and hold the SET button, and press the POWER/MUTING button to turn the power on. Use the + or – button to display MENU MODE. Press and hold the SET button for 1 second or longer.
-
Page 12: System Configurations
Note Production of the peripheral and relating devices may have been discontinued. Upon selecting the devices to be used with this product, consult your nearest Sony representative or the dealer from whom you purchased the product. Sample configuration for AV presentations... - Page 13 Sample configuration of a PA system Hand-held microphone (UTX-M03) AN-820A UHF antenna Diversity tuner module (URX-M2) WD-850 Antenna Divider MB-X6 Tuner Base Unit SRP-X100 Audio Mixer To DVD player, PC, or VTR, etc. SRP-X500P Powered Mixer 1 BNC cable 2 XLR cable...
-
Page 14: Error Messages
Messages Meanings Remedy Err 01 An error has occurred in the backup Contact your Sony dealer. memory data. Err 02 The PLL synthesized circuit is Restart the unit. If the message abnormal. appears again, contact your Sony dealer. Error Messages... -
Page 15: Troubleshooting
Troubleshooting If you have any problem using the unit, use the following checklist. Should any problem persist, consult your Sony dealer. Symptom Meanings Remedy The channel cannot An attempt was made to Restart the unit while holding be changed. change the channel by down the SET button. - Page 16 Symptom Meanings Remedy There is distortion The attenuation level of the The input level of the tuner is in the sound. transmitter is too low. extremely high. Press the + button on the transmitter in attenuation level setting mode to raise the attenuation level.
-
Page 17: Important Notes On Use
To prevent electromagnetic Important Notes interference from portable communication devices on Use The use of portable telephones and other communication devices near the unit may result in malfunction and interference with audio signals. It is recommended that portable On usage and storage communication devices near the unit be turned off. -
Page 18: Specifications
Display Specifications Channel, frequency Reference deviation ±5 kHz (at 1 kHz modulation) Frequency response Type of reception 50 Hz to 18 kHz True diversity method Dimensions Oscillator type Crystal-controlled PLL synthesizer Reception frequencies Model available in USA: 566 to 590 MHz (U30 model), 638 to 662 MHz (U42 model) Model available in Europe: 566 to 590 MHz (CE33 model), 606 to... - Page 19 Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO...
- Page 20 Sony Corporation...