Product Description; Application And Use; Output Rating; Power Backup - Toshiba 1600EP SERIES Instruction Manual

Product Description

An uninterruptible power system is a system that is installed between the commercial power and the load
equipment. The UPS provides steady AC output power during commercial power short-term blackouts or
brownouts. This power is provided for a long enough time so that the load can be shut down in an orderly
fashion. This prevents loss of data and possible damage to both hardware and software.
During normal operation, the UPS uses commercial AC power. In addition, it takes in all of the high voltage
spikes and transients caused by switching and faults, and all of the common-mode and normal mode
noise which is associated with commercial AC power. The UPS converts it all to fl at DC power. From this
power, the UPS charges its batteries and generates its own extremely high quality AC waveform output.
The result of this process is maximum power conditioning and regulation.
If the AC power supplied to the UPS drops below a specifi ed voltage level, the unit's batteries automatically
begin supplying power instead of receiving it. This insures that the loads connected to the UPS continue
to receive power with no interruption. When AC input power becomes available again, operation returns
to normal. The unit's batteries begin to recharge so they will be ready for the next power interruption.

Application and Use

Toshiba's 1600EP Series of on-line uninterruptible power system (UPS) systems provide continuous
computer-grade AC power in a compact, high performance, and energy effi cient unit. The UPS unit
assures safe and reliable operation of critical offi ce equipment. This can range from word processors and
personal computers to mini-computers and local area networks. All units feature an audible alarm which
sounds if the battery voltage drops below standard during use. This is an additional aid to help in retaining
the valuable offi ce data banks. All units allow for computer interfacing.

Output Rating

Toshiba's 1600EP Series (208/240V) offers UPS models with the following capacities:
MODEL
UE3G2L036C61T
UE3G2L060C61T
UE3G2L080C61T
UE3G2L100C61T
UE3G2L140C61T
UE3G2L180C61T
UE3G2L220C61T

Power Backup

When an electrical power failure occurs, the UPS's internal batteries automatically supply back-up power
to the load without interruption. For example, when used to support a computer, the UPS back-up assures
enough additional time to complete the activity and store the data. This allows an orderly shutdown after
a power failure has occurred.

Power Conditioning

When commercial power is present, the UPS supplies conditioned power to the load while maintaining its
batteries in a charged condition. The UPS protects against the normal, everyday problems associated
with heavy use of raw commercial power, including power sags, surges, signal interference, and spikes.
This protection keeps power-line problems from reaching your load, where they can cause equipment to
operate erratically, or damage software and hardware.
12
Output Capacity @ 240V
3.6 kVA
6 kVA
8 kVA
10 kVA
14 kVA
18 kVA
22 kVA
Output kW @ .85PF 240V
3.1 kW
5.1 kW
6.8 kW
8.5 kW
11.9 kW
15.3 kW
18.6 kW
1600EP Series Instruction Manual