Common input sources connection (1Phase units)
About this task
Common input sources connection (3Phase units)
About this task
28
Installation and User's Guide
1. Make sure the jumper is connected.
2. Insert the Normal AC cable through the
cable gland.
3. Connect the three cables to the Normal
AC source terminal blocks.
4. Insert the Output cable through the cable
gland.
5. Connect the three cables to the Output
terminal blocks.
6. Put back and secure the terminal blocks
cover with the screw.
7. Tighten the cable glands.
1. Make sure the jumper is connected.
2. Insert the Normal AC cable through the
cable gland.
3. Connect the five cables to the Normal AC
source terminal blocks.
4. Insert the Output cable through the cable
gland.
5. Connect the three cables to the Output
terminal blocks.
6. Put back and secure the terminal blocks
cover with the screw.
7. Tighten the cable glands.