D-Link DI-704P Quick Install Manual page 2

Connecting the DI-704P
Ethernet Broadband Router to your
network
First, plug in the power supply as
shown. Plug the other end of the
power supply into the power source.
Flip the POWER toggle switch to the
ON position.
(During a self-test phase, the
indicator lights will flash briefly. At
the end of the self-test, the M1
indicator light will flash continuously
to indicate normal operation.)
Next,
connect the
WAN port to
the Cable or
DSL modem
using an
Ethernet
cable.
Using CAT5 UTP cable,
connect each computer
that is equipped with an
Ethernet adapter to one
of the four Ethernet
LAN ports on the DI-
704P.
The LED for the specific
Local Ethernet Port will
light up to indicate
connection.
-2-