System Settings - Canon DP-V2410 Instruction Manual

System Settings

This menu is used to configure settings related the system of the video display.
Item
Network
Configure an IP
Address
Display
Subnet Mask
Language
Function/Channel Button
Display
Function/Display
Function (CDL)
60 OSD Menu
Setting Options (underline indicates factory default)
Configures settings for the network of the video display.
Automatic: Configures an IP address automatically with DHCP/Automatic IP.
Manual: Configure an IP address and subnet mask manually.
192.168.0.1
255.255.255.0
Sets the language of the OSD menu and messages.
English, ,
Sets the function or channel to assign to the F buttons or CH button.
Sets the function to assign to the F buttons of the main unit. Select an F button and assign a
function from the following list. The factory defaults for the main unit F buttons is as follow:
Normal mode
F1 : Contrast
F2 : Brightness
F3 : Time Code (On, Off)
F4 : WFM/VEC (On, Off)
F5 : Audio Level Meter (On, Off)
F6 : Zoom (On, Off)
F7 : Hide OSD (On, Off)
F8 : Boost Contrast (On, Off)
CDL mode
F1 : CDL R (On, Off)
F2 : CDL G (On, Off)
F3 : CDL B (On, Off)
F4 : CDL Power (On, Off)
F5 : CDL Offset (On, Off)
F6 : CDL Slope (On, Off)
F7 : CDL Saturation (On, Off)
F8 : CDL Bypass (On, Off)
Note
• When the "Backlight Control" setting is switched using an F button, the information is applied
to "Backlight Control" in "Picture Mode".
• When "Hide OSD" is set to "On", no OSD is displayed. Although operation can be performed
even when OSD is hidden, OSD for the operation is not displayed.