1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. XV-Z12000 - Vision - DLP Projector
  6. Service manual

Sharp XV-Z12000 II Service Manual

Hide thumbs Also See for XV-Z12000 II:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Operating Manual
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.
• SPECIFICATIONS ............................................. 2
• OPERATION MANUAL ...................................... 8
• REMOVING OF MAJOR PARTS ..................... 14
• THE OPTICAL UNIT OUTLINE ........................ 21
• ELECTRICAL ADJUSTMENT .......................... 25
• TROUBLE SHOOTING TABLE ........................ 34
• CHASSIS LAYOUT .......................................... 56
• BLOCK DIAGRAM ........................................... 58
• OVERALL WIRING DIAGRAM ........................ 60
• WAVEFORMS .................................................. 63
SHARP CORPORATION
SERVICE MANUAL
PROJECTOR
XV-Z12000 2 2 2 2 2
MODEL
CONTENTS
Page
• SCHEMATIC DIAGRAM .................................. 64
Ë ELECTRICAL PARTS ............................... 123
Ë ACCESSORIES PARTS ........................... 144
Ë PACKING PARTS ..................................... 144
• PACKING OF THE SET ................................. 145
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
1
XV-Z12000 2 2 2 2 2
S95N3XVZ12002
Page

Advertisement

Table of Contents
loading

Related Manuals for Sharp XV-Z12000 II

Summary of Contents for Sharp XV-Z12000 II

  • Page 1: Table Of Contents

    • OVERALL WIRING DIAGRAM ......60 • DESCRIPTION OF SCHEMATIC DIAGRAM ... 62 • WAVEFORMS ..........63 This document has been published to be used for SHARP CORPORATION after sales service only. The contents are subject to change without notice.

  • Page 2: Specifications

    Remote control, Two AA size batteries, Power cord (9'10", 3.0 m), DVI to 15-pin D-Sub adaptor, 21pin RCA conversion adaptor, Video cable, Terminal cover, Lens cap (attached), SharpVision Manager Software CD-ROM, Projector operation manual, Sharp Vision Manager operation manual Replacement parts Lamp unit (Lamp/cage module) (BQC-XVZ100005), Remote control (RRMCGA216WJSA), AA size batteries , Power cord for U.S.:CACCDA024DE01, Terminal cover (CCOVA1985CE03),...

  • Page 3: Impotant Service Safety Notes

    XV-Z12000 2 2 2 2 2 IMPORTANT SERVICE SAFETY NOTES (for USA) Ë Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and servicing guidelines as follows: » Use an AC voltmeter with sensitivity of 5000 ohm per WARNING volt., or higher, sensitivity to measure the AC voltage 1.
  • Page 4 XV-Z12000 2 2 2 2 2 NOTE TO SERVICE NOTE POUR LE PERSONNEL PERSONNEL D’ENTRETIEN PRECAUTION POUR LES RADIATIONS UV UV-RADIATION PRECAUTION La source de lumière, la lampe , dans le projecteur The light source, lamp, in the projector emits small émet de petites quantités de radiation UV.

  • Page 5: Lamp Replacement

    XV-Z12000 2 2 2 2 2 UV-RADIATION PRECAUTION (Continued) PRECAUTION POUR LES RADIATIONS UV (Suite) Lamp Replacement Remplacement de la lampe Note: Remarque: Since the lamp reaches a very high temperature Comme la lampe devient très chaude pendant le during units operation replacement of the lamp fonctionnement de l’unité, son remplacement ne doit should be done at least one hour after the power être effectué...

  • Page 6: Power Unit

    XV-Z12000 2 2 2 2 2 WARNING: High brightness light source, do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly in to the beam of light. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO MOISTURE OR WET LOCATIONS.
  • Page 7 XV-Z12000 2 2 2 2 2 Precautions for using lead-free solder 1 Employing lead-free solder "Main, Key, R/C Receiver(Rear), R/C Receiver(Front), LED, IRIS DRIVE ,PC I/F and Power PWB" of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals.

  • Page 8: Operation Manual

    XV-Z12000 2 2 2 2 2 Operation Manual rt Names Projector (Front and Top View) Adjustment b uttons MENU bu tton (", ', \, |) For displaying adjustment For selecting menu items. and setting screens. ENTER butto n RESIZE bu tton For setting items selected For switching the screen or adjusted on the menu.
  • Page 9 XV-Z12000 2 2 2 2 2 INPUT 3 terminal Terminal for connecting video Projector (Rear View) equipment with an S-video terminal. INPUT 1 terminals RS-232C terminal Terminals for For controlling component and projector using a RGB signals . computer. INPUT 5 terminal DC 12V OUTPUT Terminal for DVI terminal...
  • Page 10 XV-Z12000 2 2 2 2 2 Names Remote Control (Front View) STANDBY b utton For putting the projector into the standby mode. ON button For turning the power on. KEYSTONE button For adjusting Keystone Correction or Vertical Size setting. MENU button For displaying adjustment and ENTER button setting screens.

  • Page 11: Available Range Of The Remote Control

    XV-Z12000 2 2 2 2 2 ing the Remote Control Available Range of the Remote Control The remote control can be used to control the projector Remote control within the ranges shown in the illustration. 23'(7 m) Note 30˚ • The signal from the remote control can be reflected off a screen 30˚...

  • Page 12: Connection Pin Assignments

    XV-Z12000 2 2 2 2 2 Connection Pin Assignments nnecting Pin Assignments DVI-I (INPUT 5 / DIGITAL INPUT) port: 29 pin connector • DVI Digital INPUT Pin No. Signal Pin No. Signal T.M.D.S data 2– Hot plug detection T.M.D.S data 2+ T.M.D.S data 0–...
  • Page 13 XV-Z12000 2 2 2 2 2 Dimensions mensions Rear View Side View Top View Side View Front View (475) Bottom View Unit: inches (mm)

  • Page 14: Removing Of Major Parts

    XV-Z12000 2 2 2 2 2 REMOVING OF MAJOR PARTS 1. Removing the top panels 1-1. Remove the six lock screw. 2-1. Remove the two screws and detach the LED PWB. 1-2. Press on side Arrow A of the bottom body 2-2.
  • Page 15 XV-Z12000 2 2 2 2 2 2. Removing the cooling fan and PWB unit assembly. 3-1. Disconnect the ten connectors. 3-2. Remove the two screws and detach the lamp socket. 3-3. Remove the two screws and detach the cooling fan. 3-4.
  • Page 16 XV-Z12000 2 2 2 2 2 3. Removing the rear panel, PC unit, cooling duct and main PWB unit. 4-1. Remove the two screws. 4-2. Remove the three screws and detach the rear panel. 5-1. Remove the two screws. 5-2. Remove the four hexagonal supports and detach the shield plate. 6-1.
  • Page 17 XV-Z12000 2 2 2 2 2 4. Removing the power unit shield , power/ballast unit and power unit. Remove the seven screws and detach the power unit shield. 10-1. Remove the two screws. 10-2. Remove the four white supports and detach the ballast unit. Remove the four screws and detach the power unit.
  • Page 18 XV-Z12000 2 2 2 2 2 5. Removing the optical mechanism unit and R/C PWB unit. Disconnect the lens connectors from the IRIS DRIVER PWB unit. Remove the six screws and detach the optical mechanism unit. Remove the one screw and detach the R/C PWB unit. Remove the Two hooks and detach the IRIS DRIVER PWB unit.
  • Page 19 XV-Z12000 2 2 2 2 2 6. Removing the lamp unit, CW fan, outlet fan, bimetal, wind way duct, shield plate and formater PWB. Remove the three screws and detach the lamp unit. Remove the two screws and detach the CW fan. Remove the three screws and detach the outlet fan.

  • Page 20: Resetting The Total Lamp Timer

    XV-Z12000 2 2 2 2 2 Resetting the TOTAL LAMP TIMER ● Resetting the lamp timer Reset the lamp timer after replacing the lamp. Connect the power cord. • Plug the power cord into the AC socket of the projector. Reset the lamp timer.

  • Page 21: The Optical Unit Outline

    XV-Z12000 2 2 2 2 2 THE OPTICAL UNIT OUTLINE Layout for proper setup of the optical components and parts (top view) Projection lens Prism DMD Chips Condensor lens IR-cut mirror Light tunnel Relay lens Fold mirror Condensor lens Color filter Lamp Item Descriptions...
  • Page 22 XV-Z12000 2 2 2 2 2 Adjusting the mirrors Make adjustment by the indication territory on the screen to prevent the circumference of the screen from getting dark because a lighting range deviated. 1. Remove the top body so that the optical unit may be seen. Display white only screen on the screen. 2.
  • Page 23 XV-Z12000 2 2 2 2 2 Replacement of the DMD or formatter unit The DMD may be broken by static electricity. Always wear an earth band before beginning the work. The contact of the interposer is minute, so pay sufficient attention when handling. Attachment of DMD Check of DMD bin voltage Check the last alphabet of the lowest line of the...
  • Page 24 XV-Z12000 2 2 2 2 2 1 Formatter unit 2 DMD 3 Interposer 4 Clamp 5 Backer plate 6 Screw (4 pcs) 7 Radiator fin 8 Clip When the DMD unit has been replaced Note: DMD chip and Formatter PWB are supplied at the same time, and an exchange only with DMD isn't done.Refer to "REMOVING OF MAJOR PARTS"...

  • Page 25: Electrical Adjustment

    XV-Z12000 2 2 2 2 2 ELECTRICAL ADJUSTMENT Adjusting point Adjusting conditions Adjusting procedure The unit has been adjusted optimally at the time of factory shipment. However, if the screen position is deviated or when exchanging parts, make an adjustment as shown below. •...
  • Page 26 XV-Z12000 2 2 2 2 2 Adjusting point Adjusting conditions Adjusting procedure 2-2 A/D (COMP) 1. Input a white pattern color 1. Select the A/D (COMP) menu and set G-BRIGHT to G brightness difference signal of Y the numeric value of G-BRIGHT of A/D (RGB). adjustment (brightness) 0% and CB/CR 2.
  • Page 27 XV-Z12000 2 2 2 2 2 Adjusting point Adjusting conditions Adjusting procedure NTSC color 1. Input split color bar signal. 1. Select the VIDEO 1 menu to check the value of N- saturation INPUT 4 COLOR. adjustment 2. Select the following group Fixed value: 100 and subject.
  • Page 28 XV-Z12000 2 2 2 2 2 Adjusting point Adjusting point Adjusting conditions Adjusting conditions Adjusting procedure Adjusting procedure Off-timer per- 1. Set to the no-signal state. 1. Select OFF of LINE in the process mode and press the ENTER key on the remote control. formance check 2.
  • Page 29 XV-Z12000 2 2 2 2 2 Adjusting the PC Board Adjusting point Adjusting conditions Adjusting procedure 1. Initializing the EEPROM 1) Press SW2002 to enter the process mode. 2) Execute the S1 command on the SSS menu. (The S1 command initializes the PC board alone. Do not execute the S2 command because otherwise the adjustment data other than the PC board will be initialized.) 2.
  • Page 30 XV-Z12000 2 2 2 2 2 Background adjustment method Adjusting point Adjusting conditions Adjusting procedure Ι Ι Ι Ι Ι . Adjustment conditions 1) Adjustment item: Process mode, DLP menu GAMMA R-GAIN, G-GAIN, B-GAIN 2) Input signal: Component video 75% white signal 1 With the component video 100% white signal, adjust the output to 0.7 ±...
  • Page 31 XV-Z12000 2 2 2 2 2 Process menu 1 Adjusting point Adjusting conditions Adjusting procedure Group Sub Group Subject Adjust PC Image A/D (RGB) R-BRIGHT G-BRIGHT B-BRIGHT AD-AUTO A/D (COMP) G-BRIGHT CB-OFFSET CR-OFFSET AD AUTO Adjust HDDE formatter CW-INDEX DLP-GAMMA R-BRIGHT G-BRIGHT B-BRIGHT...
  • Page 32 XV-Z12000 2 2 2 2 2 Process menu 2 Adjusting point Adjusting conditions Adjusting procedure Group Sub Group Subject INITIAL SETTING TIME LAMP Sample Pattern PATTERN RGB(50) CROSS STEP COLOR Adjust CVIC CVIC PROGRESSSIVE MODE MDSW PTGSW C-TESTSW C-ILG-LY C-MODE-LY C-VE-LY ENH-MODE(V) TABLE...
  • Page 33 XV-Z12000 2 2 2 2 2 Process menu 3 Adjusting point Adjusting conditions Adjusting procedure Group Sub Group Subject Adjust CVIC CVIC CMS-HUE TABLE CMS-HUE-R CMS-HUE-Y CMS-HUE-G CMS-HUE-C CMS-HUE-B CMS-HUE-M CMS-SAT TABLE CMS-SAT-R CMS-SAT-Y CMS-SAT-G CMS-SAT-C CMS-SAT-B CMS-SAT-M CMS-VAL TABLE CMS-VAL-R CMS-VAL-Y CMS-VAL-G...

  • Page 34: Trouble Shooting Table

    XV-Z12000 2 2 2 2 2 TROUBLE SHOOTING TABLE Checking the basic performance Is the POWER LED on or flickering in red or blue? Go to "Checking the power unit" Is the set turned on by the set’s or remote controller’s power key? Go to "Checking the microcomputer...
  • Page 35 XV-Z12000 2 2 2 2 2 Checking the power unit Are all the connectors inside the power unit tightly connected? Insert the connectors CN7106, 7103, 7101AND 7102 tightly. Is the lamp cover closed completely? Tighten up the lamp door closed with the screws. Is the bimetal switch off? Replace the bimetal switch or press the red button to...
  • Page 36 XV-Z12000 2 2 2 2 2 The lamp lights. Check the power BU6V circuit. The power lamp does not light IC2005 is defective. at all. When plugged into an AC Check the lamp door and the lamp switch. socket, the power lamp turns Try pressing the red button on the bimetal red, but it goes out soon.
  • Page 37 XV-Z12000 2 2 2 2 2 The lamp is flashing blue continuously. Is a voltage of 2.5 V or more Check IC2005 (sub-microcomputer) and present at pins (5) and (15) of peripheral parts. J8003 in the PCI/F unit? Check IC2005 (sub-microcomputer) and Is a voltage of 3 V or more peripheral parts.
  • Page 38 XV-Z12000 2 2 2 2 2 No horizontal synchronization is being supplied from the external synchronization input. This is not normal. Is the terminal input connection as specified? Is the cable tightly connected? Use the specified cable. Reconnect it tight enough. Is there the horizontal sync pulse at pin (14) of IC2506?
  • Page 39 XV-Z12000 2 2 2 2 2 Checking IC3503 (3D Y/C separation) and its Peripheral Circuits Are there the input signals at pins (93) (Y signal) of IC3503? Check the signal input circuit or IC2505 and its peripheral circuits. Are there the output signals at pins (89) (Y signal) and (88) (C signal) of IC3503?
  • Page 40 XV-Z12000 2 2 2 2 2 Check the PCI/F unit. Can the menu display be brought up? Check OSD. Check the basic flow of the signals. Since the component and VIDEO signals follow the same path to the output as the Check the RGB input.
  • Page 41 XV-Z12000 2 2 2 2 2 Check OSD. Press the key on the main unit or the [MENU] key on the End. remote control. Is the menu display brought Is a clock signal (37.125 Is there a clock signal at IC8029 (GA4) is defective.
  • Page 42 XV-Z12000 2 2 2 2 2 Check the RGB input. Select INPUT1 or INPUT2 using the operation key or the remote control. Select INPUT1 or INPUT2 using the operation key or the remote control. Is a projection image displayed? Go to "Check the video input.". Go to "Check the synchro- Is the picture distorted? nization signal.".
  • Page 43 XV-Z12000 2 2 2 2 2 Check the video input. Set the signal generator (input Is the signal generator (input source) set correctly? source) correctly. When checking the optional input signal on the menu display, select the RGB input or Check the input signal type.
  • Page 44 XV-Z12000 2 2 2 2 2 Check the synchronization signal. Is the signal generator (input Set the signal generator (input source) set correctly? source) correctly. Is a vertical synchronization signal present at TL8134? Is a horizontal synchronization The main unit is defective. signal present at TL8133? Is a vertical synchronization signal present at TL8131?
  • Page 45 XV-Z12000 2 2 2 2 2 Check the RGB signal. Is the input signal type set to RGB? Set the input signal type to RGB. Go to "GA4 peripheral check". GA4 peripheral check Press the key on the main unit or the Go to "Check OSD.".
  • Page 46 XV-Z12000 2 2 2 2 2 IC8004 peripheral check Set the signal generator to output a RAMP signal. The IC8325 peripheral parts or Is a synchronization signal IC8025 (CVIC) are defective. present at TL8022, TL8025, and TL8084? The IC8004 clock oscillation Is a clock signal present at circuit or IC8004 is defective.
  • Page 47 XV-Z12000 2 2 2 2 2 Check the input at the components (480i and 580i are excluded). Supply a component signal to INPUT1 or INPUT2. Select INPUT1 or INPUT2 using the key on the main unit or the remote control. When checking the optional input signal on the menu display, select the component or set it to the component using the RGB/COMP key on the remote control (toggles).
  • Page 48 XV-Z12000 2 2 2 2 2 Check the SOG circuit. Is the signal generator (input Set the signal generator (input source) set correctly? source) correctly. Is a composite synchronization The SOG circuit is normal. signal present at R8981? Is a composite synchronization The IC8325 peripheral circuit is signal with the correct timing defective.
  • Page 49 XV-Z12000 2 2 2 2 2 Check the 525i (625i) RGB (or component) input. Supply a 525i (625i) RGB (or component) signal to INPUT1 or INPUT2. Select INPUT1 or INPUT2 using the key on the main unit or the remote control. When checking the optional input signal on the menu display, select RGB (or component) or set it to RGB (or component) using the RGB/COMP key on the remote control.
  • Page 50 XV-Z12000 2 2 2 2 2 Check the composite VIDEO Check the S-VIDEO input. (CVBS) input. Supply an NTSC3.58 VIDEO Supply an NTSC3.58 S-VIDEO signal to INPUT3. signal to INPUT4. Select INPUT4 using the key on Select INPUT3 using the key on the main unit or the remote control.
  • Page 51 XV-Z12000 2 2 2 2 2 Check the VIDEO synchronization signal. Is a vertical synchronization signal present at TL8140? Is a horizontal synchronization signal present at TL8142? The VIDEO synchronization signal is normal. Is a clock signal (20.25 MHz) X8006 or IC8338 is defective. present at TL8002? Is a video signal present at IC8338 is defective.
  • Page 52 XV-Z12000 2 2 2 2 2 IC8338 peripheral check Check X8006, or IC8338 is Is a clock signal (20.25 MHz) defective. present at TL8002? Is a clock signal present at IC8338 is defective. TL8004? Supply a RAMP signal to INPUT4, and observe pins (31 - 40) of IC8338 using an oscilloscope.
  • Page 53 XV-Z12000 2 2 2 2 2 Check the DVI analog input. Supply a PC-RGB analog signal to INPUT5. Select INPUT5 using the key on the main unit or the remote control. When checking the optional input signal on the menu display, set it to "A. RGB".
  • Page 54 XV-Z12000 2 2 2 2 2 Check the DVI digital input. Supply a PC-RGB digital signal to INPUT5. Select INPUT5 using the key on the main unit or the remote control. When checking the optional input signal on the menu display, set it to "D. PC RGB".
  • Page 55 XV-Z12000 2 2 2 2 2 - M E M O -...

  • Page 56: Chassis Layout

    XV-Z12000 2 2 2 2 2 CHASSIS LAYOUT IRIS DRIVE DUNTKC176DE P2101 P2104 P2103...
  • Page 57 XV-Z12000 2 2 2 2 2...

  • Page 58: Block Diagram

    XV-Z12000 2 2 2 2 2 BLOCK DIAGRAM...
  • Page 59 XV-Z12000 2 2 2 2 2...

  • Page 60: Overall Wiring Diagram

    XV-Z12000 2 2 2 2 2 OVERALL WIRING DIAGRAM...
  • Page 61 XV-Z12000 2 2 2 2 2...

  • Page 62: Description Of Schematic Diagram

    XV-Z12000 2 2 2 2 2 DESCRIPTION OF SCHEMATIC DIAGRAM VOLTAGE MEASUREMENT CONDITION: 1. Voltages at test points are measured at the supply voltage of AC 220V. Signals are fed by a color bar signal generator for servicing purpose and the above voltages are measured with a 20k ohm/V tester. WAVEFORM MEASUREMENT CONDI-TION: 1.

  • Page 63: Waveforms

    XV-Z12000 2 2 2 2 2 WAVEFORMS 1 P3580 32 2 P3580 34 3 P3580 4 4 P3580 47 (VIDEO AC) (Y-signal) (CHROMA signal) (RGB) H : 20µ sec/div H : 10µ sec/div H : 10µ sec/div H : 20µ sec/div V : 500mV/div V : 0.2V/div V : 0.2V/div...

  • Page 64: Schematic Diagram

    XV-Z12000 2 2 2 2 2 SCHEMATIC DIAGRAM Ë MAIN UNIT-1/5...
  • Page 65 XV-Z12000 2 2 2 2 2...
  • Page 66 XV-Z12000 2 2 2 2 2 Ë MAIN UNIT-2/5...
  • Page 67 XV-Z12000 2 2 2 2 2...
  • Page 68 XV-Z12000 2 2 2 2 2 Ë MAIN UNIT-3/5...
  • Page 69 XV-Z12000 2 2 2 2 2...
  • Page 70 XV-Z12000 2 2 2 2 2 Ë MAIN UNIT-4/5...
  • Page 71 XV-Z12000 2 2 2 2 2...
  • Page 72 XV-Z12000 2 2 2 2 2 Ë MAIN UNIT-5/5...
  • Page 73 XV-Z12000 2 2 2 2 2...
  • Page 74 XV-Z12000 2 2 2 2 2 Ë KEY UNIT...
  • Page 75 XV-Z12000 2 2 2 2 2 Ë R/C RECEIVER (Front) Unit Ë R/C RECEIVER (Rear) Unit...
  • Page 76 XV-Z12000 2 2 2 2 2 Ë IRIS DRIVE UNIT...
  • Page 77 XV-Z12000 2 2 2 2 2...
  • Page 78 XV-Z12000 2 2 2 2 2 Ë FORMATTER UNIT-1/7...
  • Page 79 XV-Z12000 2 2 2 2 2...
  • Page 80 XV-Z12000 2 2 2 2 2 Ë FORMATTER UNIT-2/7...
  • Page 81 XV-Z12000 2 2 2 2 2...
  • Page 82 XV-Z12000 2 2 2 2 2 Ë FORMATTER UNIT-3/7...
  • Page 83 XV-Z12000 2 2 2 2 2...
  • Page 84 XV-Z12000 2 2 2 2 2 Ë FORMATTER UNIT-4/7...
  • Page 85 XV-Z12000 2 2 2 2 2...
  • Page 86 XV-Z12000 2 2 2 2 2 Ë FORMATTER UNIT-5/7...
  • Page 87 XV-Z12000 2 2 2 2 2...
  • Page 88 XV-Z12000 2 2 2 2 2 Ë FORMATTER UNIT-6/7...
  • Page 89 XV-Z12000 2 2 2 2 2...
  • Page 90 XV-Z12000 2 2 2 2 2 Ë FORMATTER UNIT-7/7...
  • Page 91 XV-Z12000 2 2 2 2 2...
  • Page 92 XV-Z12000 2 2 2 2 2 Ë POWER UNIT...
  • Page 93 XV-Z12000 2 2 2 2 2...
  • Page 94 XV-Z12000 2 2 2 2 2 Ë PC I/F UNIT-1/9...
  • Page 95 XV-Z12000 2 2 2 2 2...
  • Page 96 XV-Z12000 2 2 2 2 2 Ë PC I/F UNIT-2/9...
  • Page 97 XV-Z12000 2 2 2 2 2...
  • Page 98 XV-Z12000 2 2 2 2 2 Ë PC I/F UNIT-3/9...
  • Page 99 XV-Z12000 2 2 2 2 2...
  • Page 100 XV-Z12000 2 2 2 2 2 Ë PC I/F UNIT-4/9...
  • Page 101 XV-Z12000 2 2 2 2 2...
  • Page 102 XV-Z12000 2 2 2 2 2 Ë PC I/F UNIT-5/9...
  • Page 103 XV-Z12000 2 2 2 2 2...
  • Page 104 XV-Z12000 2 2 2 2 2 Ë PC I/F UNIT-6/9...
  • Page 105 XV-Z12000 2 2 2 2 2...
  • Page 106 XV-Z12000 2 2 2 2 2 Ë PC I/F UNIT-7/9...
  • Page 107 XV-Z12000 2 2 2 2 2...
  • Page 108 XV-Z12000 2 2 2 2 2 Ë PC I/F UNIT-8/9...
  • Page 109 XV-Z12000 2 2 2 2 2...
  • Page 110 XV-Z12000 2 2 2 2 2 Ë PC I/F UNIT-9/9...
  • Page 111 XV-Z12000 2 2 2 2 2...
  • Page 112 XV-Z12000 2 2 2 2 2 Ë LED UNIT...

  • Page 113: Printed Wiring Board Assemblies

    XV-Z12000 2 2 2 2 2 PRINTED WIRING BOARD ASSEMBLIES Power Unit (Component Side) Power Unit (Wiring Side)
  • Page 114 XV-Z12000 2 2 2 2 2 Main Unit (Component Side)
  • Page 115 XV-Z12000 2 2 2 2 2...
  • Page 116 XV-Z12000 2 2 2 2 2 Main Unit (Wiring Side)
  • Page 117 XV-Z12000 2 2 2 2 2...
  • Page 118 XV-Z12000 2 2 2 2 2 Key Unit (Component Side) R/C Receiver (Rear) Unit (Component Side) R/C Receiver (Front) Unit (Component Side) LED Unit (Component Side) IRIS DRIVE Unit (Component Side)
  • Page 119 XV-Z12000 2 2 2 2 2 Key Unit (Wiring Side) R/C Receiver (Rear)Unit (Wiring Side) R/C Receiver (Front)Unit (Wiring Side) LED Unit (Wiring Side) IRIS DRIVE Unit (Wiring Side)
  • Page 120 XV-Z12000 2 2 2 2 2 PC I/F Unit (Component Side)
  • Page 121 XV-Z12000 2 2 2 2 2 PC I/F Unit (Wiring Side)
  • Page 122 XV-Z12000 2 2 2 2 2 FORMATTER Unit (Component Side) FORMATTER Unit (Wiring Side)

  • Page 123: Parts List

    For location of SHARP Parts Distributor, IC2511 VHiTL712CPW-1Y J TL712CPWR Please call Toll-Free; 1-800-BE-SHARP IC2512 VHiTL712CPW-1Y J TL712CPWR IC2513 VHiTL712CPW-1Y J TL712CPWR in CANADA: Contact SHARP Electronics of Canada Limited IC2514 VHiHC4538PW-1Y J 74HC4538PW/G Phone (416) 890-2100. IC2515 VHiT7SET08U1EY J TC7SET08FU(T5L IC2805 VHiPQ09DZ1U-1Y J PQ09DZ1U ★...
  • Page 124 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code FL3501 RCiLF0306CEZZY J Filter Coil DUNTKC171DE03 FL3502 RCiLF0306CEZZY J Filter Coil FL3503 RCiLF0306CEZZY J Filter Coil MAIN UNIT(Continued) L2501 VPCUN680K3R5NY J Peaking, 68µH L2801 RCiLP0303TAZZY J Coil...
  • Page 125 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code C3521 VCKYCY1EF104ZY J 0.1 Ceramic DUNTKC171DE03 C3522 VCKYCY1EF104ZY J 0.1 Ceramic C3523 VCKYCY1EF104ZY J 0.1 Ceramic MAIN UNIT(Continued) C3524 VCEAPF1HW105MY J 1 Electrolytic C3525 VCEAPF0JW227MY J 220 6.3V Electrolytic...
  • Page 126 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code R2671 VRS-CY1JF183JY J 18K 1/16W Metal Oxide DUNTKC171DE03 R2672 VRS-CY1JF472JY J 4.7K 1/16W Metal Oxide R2673 VRS-CY1JF103JY J 10K 1/16W Metal Oxide MAIN UNIT(Continued) R2674 VRS-CY1JF333JY J 33K 1/16W Metal Oxide...
  • Page 127 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code R3548 VRS-CY1JF391JY J 390 1/16W Metal Oxide DUNTKC171DE03 R3549 VRS-CY1JF472JY J 4.7K 1/16W Metal Oxide R3550 VRS-CY1JF100JY J 10 1/16W Metal Oxide MAIN UNIT(Continued) R3551 VRS-CY1JF392JY J 3.9K 1/16W Metal Oxide...
  • Page 128 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC172DE03 DUNTKC171DE03 KEY UNIT MAIN UNIT(Continued) CAPACITOR J2801 QJAKA0022CEZZ J Jack, Wired R/C J2802 QJAKE0071CEZZ J DC 12V Out C2202 VCKYCY1CB104KY J 0.1 Ceramic P2001 QPLGN1358REZZY J Plug, 13pin(KEY) P2801 QPLGN0540FJZZY J Plug, 3pin...

  • Page 129: Formatter Unit

    XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC175DE03 DUNTKB474FE06 LED UNIT FORMATTER UNIT INTEGRATED CIRCUITS DIODES IC9001 VHiVCX16374-1Y J TC74VCX16374FT D2202 RH-PX0445CEZZY J LED RED & BLUE D2203 RH-PX0445CEZZY J LED RED &...
  • Page 130 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code C9228 VCKYCY1EB104KY J 0.1 Ceramic DUNTKB474FE06 C9229 VCKYCY1EB104KY J 0.1 Ceramic C9230 VCKYCY1EB104KY J 0.1 Ceramic FORMATTER UNIT(Continued) C9231 VCKYCY1EB104KY J 0.1 Ceramic C9232 VCCCCY1HH5R0CY J 5p Ceramic...
  • Page 131 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code R9208 VRS-CY1JF102JY J 1K 1/16W Metal Oxide DUNTKB474FE06 R9209 VRS-CY1JF111FY J 110 1/16W Metal Oxide R9210 VRS-CY1JF330FY J 33 1/16W Metal Oxide FORMATTER UNIT(Continued) R9211 VRS-CY1JF121FY J 120 1/16W Metal Oxide...
  • Page 132 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code RDENCA055WJZZ DUNTKB474FE06 POWER UNIT FORMATTER UNIT(Continued) INTEGRATED CIRCUITS S9104 QSW-SA012WJZZY J Slide Switch TP9509 QEARBA005WJFMY J å IC7001 95CH3151AC001 J FA5502M TP9510 QEARBA005WJFMY J IC7002 95C0H1Q3A0010 J TA76431...
  • Page 133 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code C7207 95C0C1Q2E1030 J 0.01 Ceramic RDENCA055WJZZ C7208 95C0C3A0D3300 J 33 Eleectrolytic AK C7209 95C0C1Q1E4710 J 470p Ceramic POWER UNIT(Continued) C7210 95C0C1Q2E1030 J 0.01 Ceramic C7211 95C0C1Q2C4730...
  • Page 134 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code R7401 95C0R516FR050 J 0.05 3W RDENCA055WJZZ R7402 95C0R516FR050 J 0.05 3W R7403 95C0R3Q8S2210 J 220 1/16W POWER UNIT(Continued) R7404 95C0R3Q4S1030 J 10k 1/16W Chip1608 R7405 95C0R3Q4S1030 J 10k 1/16W Chip1608...
  • Page 135 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code PACKAGED CIRCUITS CPCI-A008CE07 X8001 9DK001-80012 J CX-5F(6MHz Å}50PPM) X8003 9DK001-80011 J FXO-31FL(1.8432MHz) PC I/F UNIT(Continued) X8004 9DK001-80018 J FXO-31FL(25.000MHz) X8005 9DK001-80036 J FXO-31FL(37.125MHz) INTEGRATED CIRCUITS X8006 9DK001-80020...
  • Page 136 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code C8564 9DK001-40158 J 47 6.3V Electrolytic CPCI-A008CE07 C8565 9DK001-42094 J 0.1 Ceramic C8566 9DK001-42123 J 330p Ceramic PC I/F UNIT(Continued) C8569 9DK001-42094 J 0.1 Ceramic...
  • Page 137 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code FL8098 9DK001-50110 1/10W Chip 2125 CPCI-A008CE07 FL8099 9DK001-50110 1/10W Chip 2125 FL8100 9DK001-50113 1/4W Chip 3216 PC I/F UNIT(Continued) FL8103 9DK001-50113 1/4W Chip 3216 FL8111 9DK001-50113...
  • Page 138 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code R8689 9DK001-50173 J 470 1/16W Chip 1608 CPCI-A008CE07 R8690 9DK001-50205 J 1.8k 1/16W Chip 1608 R8692 9DK001-50159 J 22 1/16W Chip 1608 PC I/F UNIT(Continued) R8693 9DK001-50159 J 22...

  • Page 139: Cabinet And Mechanical Parts

    Not Available - Top Body — SSAKA1109CEZZ J Cover Sack 1-1-2 GCOVA1981CESA J Rear R/C Cover 1-1-3 HBDGS3153CESA J SHARP VISION Badge CDUC-0154CE02 J HDDE Duct Ass’y 1-1-5 HiNDPA702WJSA J Operation Indication NFANR0072CE00 J Fan 1-1-6 PFILD0139CEZZ J Back Intake Filter...
  • Page 140 XV-Z12000 2 2 2 2 2 CABINET AND MECHANICAL PARTS 11-3 1-1-5 11-1 1-13 1-1-6 1-1-3 1-16 11-4 1-1-1 1-20 1-1-2 1-14 11-2 1-1-10 1-1-9 1-20 1-15 1-10 1-20 1-1 1 1-20 1-1-8 1-20 1-19 1-12 1-1-10 1-20 12-2 12-2 1-18 1-17 12-1...
  • Page 141 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code CABINET AND MECHANICAL PARTS DMD RELATED PARTS (Continued) NFANSA013WJ00 J Color Wheel Fan LX-BZA012WJFE J Screw, x4 NFANS0029CEZZ J Out Fan QSOCZA109WJZZ J DMD Socket NFANSA008WJ00...
  • Page 142 XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code OPTICS MECHANISM PARTS CCHSK0103CE06 J Optics Mechanism Ass'y 9HN-3650-0510 J Body Ass’y 9HN-3623-0042 J Cover Ass’y CLNS-A040WJ06 J Projection Lens 9HN-3623-0043 J Projection Lens Fixin Plate AR Ass'y, x2...
  • Page 143 XV-Z12000 2 2 2 2 2 OPTICS MECHANISM PARTS 6-19 6-20 6-21 8-17 6-15 6-16 6-16 6-12 6-22 8-13 6-11 6-14 6-13 8-16 6-10 6-17 6-18 8-11 8-11 8-11 8-12 8-10 8-11 8-14...

  • Page 144: Ë Accessories Parts

    XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code PACKING PARTS SUPPLIED ACCESSORIES (NOT REPLACEMENT ITEM) QACCDA024WJPA J AC Cord SPAKCC220WJZZ – Packing Case — å RRMCGA216WJSA J R/C Unit SPAKPA123WJZZ –...

  • Page 145: Packing Of The Set

    XV-Z12000 2 2 2 2 2 ★ ★ Ref. No. Part No. Description Code Ref. No. Part No. Description Code PACKING OF THE SET Lens Cap (PCAPH1056CESA) FRONT Fix with craft tape. Fix with 6 staples.
  • Page 146 Code Ref. No. Part No. Description Code COPYRIGHT © 2005 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

Table of Contents