Sharp LC-13E1U Service Manual
Hide thumbs Also See for LC-13E1U:

Advertisement

In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.
» IMPORTANT SERVICE SAFETY PRECAUTION ................................................................................... 2
» SPECIFICATIONS ................................................................................................................................... 5
» OPERATION MANUAL ............................................................................................................................ 6
» DIMENSIONS .......................................................................................................................................... 8
» REMOVING OF MAJOR PARTS ........................................................................................................... 10
» ADJUSTING PROCEDURE OF EACH SECTION ................................................................................ 14
» PUBLIC MODE ...................................................................................................................................... 25
» TROUBLE SHOOTING TABLE ............................................................................................................. 27
» CHASSIS LAYOUT ................................................................................................................................ 31
» BLOCK DIAGRAM ................................................................................................................................. 32
» OVERALL WIRING DIAGRAM .............................................................................................................. 34
» DESCRIPTION OF SCHEMATIC DIAGRAM ........................................................................................ 38
» SCHEMATIC DIAGRAM ........................................................................................................................ 39
» PRINTED WIRING BOARD ASSEMBLIES ........................................................................................... 57
» PARTS LIST ........................................................................................................................................... 67
» PACKING OF THE SET ......................................................................................................................... 81
SHARP CORPORATION
SERVICE MANUAL
LCD COLOR TELEVISION
LC-13E1U/UB/UW
LC-15E1U/UB/UW
MODELS
CONTENTS
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
LC-13E1U/UB/UW
LC-15E1U/UB/UW
S72N2LC-13E1U
Page

Advertisement

Table of Contents
loading

Summary of Contents for Sharp LC-13E1U

  • Page 1: Table Of Contents

    LC-13E1U/UB/UW LC-15E1U/UB/UW SERVICE MANUAL S72N2LC-13E1U LCD COLOR TELEVISION LC-13E1U/UB/UW LC-15E1U/UB/UW MODELS In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.
  • Page 2: Important Service Safety Precaution

    LC-13E1U/UB/UW LC-15E1U/UB/UW IMPORTANT SERVICE SAFETY PRECAUTION Ë Service work should be perfomed only by qualified service technicians who are thor- oughly familiar with all safety checks and the servicing guidelines which follow: ground, such as electrical conduit or electrical ground WARNING connected to an earth ground.
  • Page 3 LC-13E1U/UB/UW LC-15E1U/UB/UW PRECAUTIONS A PRENDRE LORS DE LA REPARATION Ë Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement accoutumé à toute vérification de sécurité et aux conseils suivants. conduite électrique ou une prise de terre branchée à...
  • Page 4 LC-13E1U/UB/UW LC-15E1U/UB/UW Precautions for using lead-free solder 1 Employing lead-free solder "All PWBs" of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.
  • Page 5: Specifications

    Environmental conditions 0°C ~ 40°C As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 6: Operation Manual

    LC-13E1U/UB/UW LC-15E1U/UB/UW OPERATION MANUAL...
  • Page 7 LC-13E1U/UB/UW LC-15E1U/UB/UW...
  • Page 8: Dimensions

    LC-13E1U/UB/UW LC-15E1U/UB/UW DIMENSIONS Unit: inch/(mm) ËLC-13E1U MENU TV/VIDEO MAIN POWER (337) (97) POWER SLEEP (59) (147) 3.9/100 (100) VIDEO AV-IN 1 AUDIO VIDEO S-VIDEO AV-IN 2/OUT AUDIO HEAD PHONE ANT. COMPONENT AUDIO POWER INPUT DC12V...
  • Page 9 LC-13E1U/UB/UW LC-15E1U/UB/UW ËLC-15E1U Unit: inch/(mm) MENU TV/VIDEO MAIN POWER (379) (97) POWER SLEEP (59) (156) 3.9/100 (100) VIDEO AV-IN 1 AUDIO VIDEO S-VIDEO AV-IN 2/OUT AUDIO HEAD PHONE COMPONENT ANT. AUDIO POWER INPUT DC12V...
  • Page 10: Removing Of Major Parts

    LC-13E1U/UB/UW LC-15E1U/UB/UW REMOVING OF MAJOR PARTS 1. Remove the table stand fixing screws (4 pcs.). 2. Remove the two terminal covers. 3. Remove the terminal section fixing screws (2 pcs.). 4. Remove the cabinet B fixing screws (6 pcs.). 5. Cabinet A is opend order of 5-1 to 5-6 , and detach the Cabinet B.
  • Page 11 LC-15E1U/UB/UW 9. Remove the inverter PWB fixing screws (2 pcs.). 10. Remove the digital PWB fixing screws (2 pcs.) (LC-13E1U). 10. Remove the digital PWB fixing screws (3 pcs.) (LC-15E1U). 11. Remove the analog PWB fixing screws (4 pcs.) and detatch the chassis frame cover fixing hooks.
  • Page 12 4. Be careful not to fall, shake and shock the panels. 14. Remove the LCD panel unit fixing screws (4 pcs.) (LC-15E1U). 14. Remove the LCD panel unit fixing screws (2 pcs.) (~ LC-13E1U). 15. Detach the two diffusion sheets and reflection/deflection sheet.
  • Page 13 LC-13E1U/UB/UW LC-15E1U/UB/UW » Precautions at the time of the side B(back) service of Digital unit. 1. Remove only SC2001 of the FFC for connection between Digital unit(SC2001) and Analag unit(SC3100), and connect the extended cable (QCNW-A324WJZZ) for service. 2. Remove only P2004 of the Connecting Cord for connection between Digital unit(P2004) and Analag unit(P3702), and connect the extended cable (QCNW-A323WJZZ) for service.
  • Page 14: Adjusting Procedure Of Each Section

    LC-13E1U/UB/UW LC-15E1U/UB/UW ADJUSTING PROCEDURE OF EACH SECTION The best adjustment is made before shipping. If any position deviation is found or after part replace is performed, adjust as follows. 1. Preparation for Adjustments (1)Use the exclusive-use AC adapter or stable DC power supply.
  • Page 15 Inch Size setup 1. Go to the adjustment mode. 1. Select "INCH SIZE" and adjust to (If E PROM is replaced) "13" (LC-13E1U), "15" (LC-15E1U) (IC2004) with [VOL +] or [VOL –] key. * The color of "INCH SIZE" must be yellow.
  • Page 16 1. Go to the adjustment mode and check 1.See if all the settings are as specified. the following settings. If not, select an item in question with the settings (LC-13E1U) (LC-15E1U) [VOL +] or [VOL –] key and adjust the (If E PROM is replaced) » LVL setting as shown at left.
  • Page 17 LC-13E1U/UB/UW LC-15E1U/UB/UW Shipping setting list Channel ............................... 2ch Air/Cable ............................. Air Skip Data_CATV ..........................All Skip Skip Data_AIR ............................ All Skip Volume ..............................20 Picture ..............................30 Tint ..............................0 Color ..............................0 Black Level ............................0 SHARPNESS ............................0 RED-BLUE ............................
  • Page 18 LC-13E1U/UB/UW LC-15E1U/UB/UW Test patterns in adjustment process mode [1] IC801 (Video decoder) test patterns 1-1. Getting the test patterns displayed Put the screen in AV1, AV2 or COMPONENT but keep out any signal. Call the adjustment process mode, select “TEST PATTERN” in the 3rd line of page 8, make the settings 1 thru 6, and the following test patterns show up.
  • Page 19 LC-13E1U/UB/UW LC-15E1U/UB/UW Pin functions of microprocessor IC (IC2001) RH-iXA300WJZZQ Pin name Function Pin name Function V HOLD Closed caption Adjustment process Closed caption AV/SY/DY2 US CCD input select MAIN SW FSMUTE Main switch ON[H]/OFF[L] Front mute TIMELED RSMUTE Off timer LED light-up...
  • Page 20 FSP TEST Audio test (FS mute ON/OFF) WF level adjustment Change to “-17” WF LPF cutoff frequency setting Change to “300” (LC-13E1U),“250”(LC-15E1U) MDB amount of effects setting Change to “55” MDB limit value setting Change to “-25” (LC-13E1U),“-17”(LC-15E1U) MDB harmonics effect setting...
  • Page 21 MDB Zone restriction LPF cutoff frequency Change to “180” EXT GEQ BAND1 +1.5 +2.0 Equalizer setting 1 (external input) Change to “+2.0” (LC-13E1U),“+1.5”(LC-15E1U) EXT GEQ BAND2 +0.5 +0.5 Equalizer setting 2 (external input) Change to “-4.0” (LC-13E1U),“-3.5”(LC-15E1U) EXT GEQ BAND3 –2.0...
  • Page 22 LC-13E1U/UB/UW LC-15E1U/UB/UW Initial setting Page Item Function Adjust/modify LC-13E1U LC-15E1U N358 TV LDLY –2 –2 Y/C phase setting (TV) N358 AV LDLY –2 –2 Y/C phase setting (composite, S video) N443 AV COLOR 2600 2600 Color density setting (composite, S video)
  • Page 23 LC-13E1U/UB/UW LC-15E1U/UB/UW Initial setting Page Item Function Adjust/modify LC-13E1U LC-15E1U Search AFT reference settings & LCD controller settings AFT UP AFT reference voltage AFT DOWN AFT reference voltage NTSC 01 Initial settings NTSC 02 Various settings NTSC 03 RCUTOFF NTSC 04...
  • Page 24 LC-13E1U/UB/UW LC-15E1U/UB/UW Initial setting Page Item Function Adjust/modify LC-13E1U LC-15E1U Gradation & COM settings V255 Gradation power reference voltage V255 BIAS Gradation power reference voltage V235 Gradation power reference voltage V235 BIAS Gradation power reference voltage V176 Gradation power reference voltage...
  • Page 25: Public Mode

    LC-13E1U/UB/UW LC-15E1U/UB/UW PUBLIC MODE 1. Outline The Public mode is designed to limit the functions of LCD TV sets that are set up at hotels, public places (hospitals, for example), shop fronts and similar locations. Note: In the Public mode, some user settings may fail to be changed later. The Closed Caption, V-Chip, MTS and some other functions, as well as the volume control must be preset before getting the TV set into the Public mode.
  • Page 26 LC-13E1U/UB/UW LC-15E1U/UB/UW Item Default Setting Function MAXIMUM VOLUME 1~60 Sets the highest sound volume level. (The volume level is expressed in digital form only.) VOLUME FIXED VARIABLE VARIABLE Makes the sound volume adjustable. FIXED Keeps the sound volume fixed. (The sound volume is fixed at the then level. The Volume and Mute characters are not displayed onscreen.)
  • Page 27: Trouble Shooting Table

    LC-13E1U/UB/UW LC-15E1U/UB/UW TROUBLE SHOOTING TABLE No Power (Power LED indicator still in red) Go to the adjustment process mode. MODEL INCH SIZE SYSTEM AUTO NTSC PWM FREQ PAL PWM FREQ NTSC PWM DUTY PAL PWM DUTY TV GAIN ERROR NO RESET...
  • Page 28 LC-13E1U/UB/UW LC-15E1U/UB/UW TROUBLE SHOOTING TABLE (Continued)
  • Page 29 LC-13E1U/UB/UW LC-15E1U/UB/UW TROUBLE SHOOTING TABLE (Continued)
  • Page 30 LC-13E1U/UB/UW LC-15E1U/UB/UW TROUBLE SHOOTING TABLE (Continued)
  • Page 31: Chassis Layout

    LC-13E1U/UB/UW LC-15E1U/UB/UW CHASSIS LAYOUT CONTROL PWB DIGITAL PWB INVERTER PWB ANALOG PWB R/C, LED PWB...
  • Page 32: Block Diagram

    LC-13E1U/UB/UW LC-15E1U/UB/UW BLOCK DIAGRAM ANALOG UNIT TV-V TUNER TU3201 SIF-AMP. Q3201 Q3202 SY, SC AV 1 TV-V S-VIDEO VIDEO L1, R1 INPUT SWITCH IC402 V2/VO AV 2 AUDIO VIDEO L2, R2 INPUT IN/OUT IN/OUT OUTPUT SWITCH SWITCH VOUT Q3501-Q3505 IC3501...
  • Page 33 LC-13E1U/UB/UW LC-15E1U/UB/UW DIGITAL UNIT SY, SC VIDEO WITCH IC402 VIDEO DECODER CONTROLLER (VPC) IC1201 IC801 PANEL FIFO IC1202 SYNC BUFFER ARATER. Q402 Q401 IC401 GRADUATION 3.3V REG. POWER FOR IC702 IC1102-IC1108 IC1110 CK, VD, HD, OSD-RGB CVIN IC1112 IC1114 3 WIRE...
  • Page 34: Overall Wiring Diagram

    LC-13E1U/UB/UW LC-15E1U/UB/UW MODEL LC-13E1U OVERALL WIRING DIAGRAM...
  • Page 35 LC-13E1U/UB/UW LC-15E1U/UB/UW...
  • Page 36 LC-13E1U/UB/UW LC-15E1U/UB/UW MODEL LC-15E1U OVERALL WIRING DIAGRAM...
  • Page 37 LC-13E1U/UB/UW LC-15E1U/UB/UW...
  • Page 38: Description Of Schematic Diagram

    LC-13E1U/UB/UW LC-15E1U/UB/UW DESCRIPTION OF SCHEMATIC DIAGRAM VOLTAGE MEASUREMENT CONDITION: 1. The voltages at test points are measured on exclusive AC adaptor and the stble supply voltage of AC 120V. Signals are fed by a color bar signal generator for servicing purpose and the above voltages are measured with a 20k ohm/V tester.
  • Page 39: Schematic Diagram

    LC-13E1U/UB/UW LC-15E1U/UB/UW SCHEMATIC DIAGRAM Ë R/C, LED and CONTROL Unit...
  • Page 40 LC-13E1U/UB/UW LC-15E1U/UB/UW Ë DIGITAL Unit-1/4...
  • Page 41 LC-13E1U/UB/UW LC-15E1U/UB/UW...
  • Page 42 LC-13E1U/UB/UW LC-15E1U/UB/UW Ë DIGITAL Unit-2/4...
  • Page 43 LC-13E1U/UB/UW LC-15E1U/UB/UW...
  • Page 44 LC-13E1U/UB/UW LC-15E1U/UB/UW Ë DIGITAL Unit-3/4...
  • Page 45 LC-13E1U/UB/UW LC-15E1U/UB/UW...
  • Page 46 LC-13E1U/UB/UW LC-15E1U/UB/UW Ë DIGITAL Unit-4/4...
  • Page 47 LC-13E1U/UB/UW LC-15E1U/UB/UW...
  • Page 48 LC-13E1U/UB/UW LC-15E1U/UB/UW Ë ANALOG Unit-1/2 (LC-13E1U)
  • Page 49 LC-13E1U/UB/UW LC-15E1U/UB/UW...
  • Page 50 LC-13E1U/UB/UW LC-15E1U/UB/UW Ë ANALOG Unit-2/2 (LC-13E1U)
  • Page 51 LC-13E1U/UB/UW LC-15E1U/UB/UW...
  • Page 52 LC-13E1U/UB/UW LC-15E1U/UB/UW Ë ANALOG Unit-1/2 (LC-15E1U)
  • Page 53 LC-13E1U/UB/UW LC-15E1U/UB/UW...
  • Page 54 LC-13E1U/UB/UW LC-15E1U/UB/UW Ë ANALOG Unit-2/2 (LC-15E1U)
  • Page 55 LC-13E1U/UB/UW LC-15E1U/UB/UW...
  • Page 56: Inverter Unit

    LC-13E1U/UB/UW LC-15E1U/UB/UW Ë INVERTER Unit...
  • Page 57: Printed Wiring Board Assemblies

    LC-13E1U/UB/UW LC-15E1U/UB/UW PRINTED WIRING BOARD ASSEMBLIES ANALOG Unit (Side-A)
  • Page 58 LC-13E1U/UB/UW LC-15E1U/UB/UW P3704 R3756 R3701 C3700 D3703 FB3701 FB3709 R3717 C3703 R3768 R3706 IC3701 R3703 R3707 C3706 R3708 R3705 C3705 R3711 C3707 R3709 R3760 C3719 R3727 R3732 C3716 L3704 Q3704 R3762 Q3707 R3746 R3745 R3743 C3205 R3752 R3733 C3730 C3738...
  • Page 59 LC-13E1U/UB/UW LC-15E1U/UB/UW P3602 P3601 P3500 P3502 P3501 D3601 D3602 C3607 R3757 R3605 C3606 Q3602 C3603 C3605 R3604 R3608 R3607 C3602 C3604 C3601 Q3601 C3600 D3703 R3718 D3607 C3608 FB3701 C3609 C3711 C3713 D3608 FB3709 R3721 R3720 R3722 R3610 FB3700 R3717...
  • Page 60 LC-13E1U/UB/UW LC-15E1U/UB/UW DIGITAL Unit (Side-A)
  • Page 61 LC-13E1U/UB/UW LC-15E1U/UB/UW FB7003 FL7004 C7047 C7122 D7701 SC2001 R7023 R7024 R7025 C7105 C7046 R417 R418 IC7201 C7203 C7053 R7204 C703 C7201 R423 IC7001 C7202 IC402 R424 C7005 D2002 C410 R7003 R7112 D2003 C2021 R2050 C7101 FL7001 C7027 R7001 C7059 R7106...
  • Page 62 LC-13E1U/UB/UW LC-15E1U/UB/UW DIGITAL Unit (Side-B)
  • Page 63 LC-13E1U/UB/UW LC-15E1U/UB/UW IC7102 IC7002 IC7701 R7704 R7047 R717 R719 L7003 C7021 R7053 R716 C7020 R7038 C7062 C7018 R7040 C7017 C7032 C7004 C7058 C7041 C7014 C7060 C7013 L7002 C7061 R7002 R7104 R7103 R7035 R7007 R7006 Q7002 R7008 Q7102 Q7101 R7009 R7101...
  • Page 64 LC-13E1U/UB/UW LC-15E1U/UB/UW INVERTER Unit (Component Side)
  • Page 65 LC-13E1U/UB/UW LC-15E1U/UB/UW R6503 Q6502 Q6500 Q6501 C6501 R6508 D6500 R6509 C6510 C6500 R6507 R6506 C6508 C6507 Q6504 Q6503 T6503 T6502 C6506 INVERTER Unit (Chip Parts Side)
  • Page 66 LC-13E1U/UB/UW LC-15E1U/UB/UW R/C, LED Unit (Side-A) D4022 R4023 Q4004 D4012 Q4007 R4032 R4024 RMC4002 D4014 D4015 R4029 R/C, LED Unit (Chip Parts Side-A) CONTROL Unit (Side-A) (QPWBSB413WJZZ) CONTROL Unit (Chip Parts Side-A) (QPWBSB413WJZZ)
  • Page 67: Parts List

    4. DESCRIPTION in USA: Contact your nearest SHARP Parts Distributor to order. in CANADA: Contact SHARP Electronics of Canada Limited For location of SHARP Parts Distributor, Please call Toll- Phone (416) 890-2100 Free; 1-800-BE-SHARP MARK: SPARE PARTS-DELIVERY SECTION MARQUE: SECTION LIVRAISON DES PIECES DE RECHANGE Ref.
  • Page 68 LC-13E1U/UB/UW LC-15E1U/UB/UW Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA670FE27(LC-13E1U) C706 VCEAPF0JN226MY J 22 6.3V Electrolytic DUNTKA670FE28(LC-15E1U) C711 VCKYCY1EF104ZY J 0.1 Ceramic C801 VCEAPF1CN106MY J 10 Electrolytic DIGITAL UNIT (Continued) C802 VCKYCY1EF104ZY J 0.1 Ceramic...
  • Page 69 LC-13E1U/UB/UW LC-15E1U/UB/UW Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA670FE27(LC-13E1U) R417 VRS-CY1JF101JY J 100 1/16W Metal Oxide DUNTKA670FE28(LC-15E1U) R418 VRS-CY1JF101JY J 100 1/16W Metal Oxide R419 VRS-CY1JF101JY J 100 1/16W Metal Oxide DIGITAL UNIT (Continued)
  • Page 70 LC-13E1U/UB/UW LC-15E1U/UB/UW Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA670FE27(LC-13E1U) R1214 VRS-CB1JF101JY J 100 1/16W Metal Oxide DUNTKA670FE28(LC-15E1U) R1217 VRS-CY1JF101JY J 100 1/16W Metal Oxide R1218 VRS-CA1JF101JY J 100 1/16W Metal Oxide DIGITAL UNIT (Continued) R1220 VRS-CY1JF472JY J 4.7k 1/16W Metal Oxide...
  • Page 71 LC-13E1U/UB/UW LC-15E1U/UB/UW Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA670FE27(LC-13E1U) DUNTKB412DE01(LC-13E1U) DUNTKA670FE28(LC-15E1U) DUNTKB412DE02(LC-15E1U) DIGITAL UNIT (Continued) ANALOG UNIT TUNER SC1201 QSOCNA002WJPZY J Socket, 20-pin SC1202 QSOCN0687FJZZY J Socket, 50-pin NOTE: THE PARTS HERE SHOWN ARE SUPPLIED AS AN SC1203 QSOCN0206FJZZY J Socket, 30-pin ASSEMBLY BUT NOT INDEPENDENTLY.
  • Page 72 LC-13E1U/UB/UW LC-15E1U/UB/UW Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB412DE01(LC-13E1U) C3340 VCKYCY1EF104ZY J 0.1 Ceramic DUNTKB412DE02(LC-15E1U) C3341 VCCCCY1HH101JY J 100p Ceramic C3342 VCCCCY1HH101JY J 100p Ceramic ANALOG UNIT (Continued) C3343 VCCCCY1HH101JY J 100p Ceramic L3700...
  • Page 73 LC-13E1U/UB/UW LC-15E1U/UB/UW Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB412DE01(LC-13E1U) R3336 VRS-CY1JF102JY J 1k 1/16W Metal Oxide DUNTKB412DE02(LC-15E1U) R3337 VRS-CY1JF104JY J 100k 1/16W Metal Oxide R3338 VRS-CY1JF104JY J 100k 1/16W Metal Oxide ANALOG UNIT (Continued)
  • Page 74 J 820k 1/16W Metal Oxide P3702 QCNW-A698WJZZ J Connecting Cord (LC-15E1U) R3607 VRS-CB1JF562JY J 5.6k 1/16W Metal Oxide P3702 QCNW-A700WJZZ J Connecting Cord (LC-13E1U) R3610 VRS-CY1JF563JY J 56k 1/16W Metal Oxide P3703 QPLGN0378GEZZ J Plug, 3-pin R3700 VRS-CY1JF472JY J 4.7k 1/16W Metal Oxide...
  • Page 75: Control Unit

    LC-13E1U/UB/UW LC-15E1U/UB/UW Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB413DE01(LC-13E1U) DUNTKB414DE01(LC-13E1U) DUNTKB413DE02(LC-15E1U) DUNTKB414DE02(LC-15E1U) CONTROL UNIT R/C, LED UNIT DIODES TRANSISTORS D4008 RH-EX1283CEZZY J Zener Diode, 18V Q4003 VSDTC144EE/-1Y J DTC144EE D4009 RH-EX1271CEZZY J Zener Diode, 12V...
  • Page 76 LC-13E1U/UB/UW LC-15E1U/UB/UW Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB415DE01(LC-13E1U) DUNTKB415DE02(LC-15E1U) INVERTER UNIT TRANSISTORS Q6500 VSFZT1053A/-1Y J FZT1053A Q6501 VSFZT1053A/-1Y J FZT1053A Q6502 VS2SA1530AR-1Y J 2SA1530AR Q6503 VSFZT1053A/-1Y J FZT1053A Q6504 VSFZT1053A/-1Y J FZT1053A Q6505 VS2SA1530AR-1Y...
  • Page 77: Cabinet And Mechanical Parts

    GCOVAA129WJKC J Chassis Frame(LC-13E1UW) AQ GCOVA2103CEKA J Chassis Frame Cover MODEL : LC-13E1U (LC-13E1U) GCOVA2103CEKB J Chassis Frame Cover CCABAA092WJ01 J Cabinet A Ass’y(LC-13E1U) BG (LC-13E1UB) CCABAA092WJ02 J Cabinet A Ass’y(LC-13E1UB) BG GCOVA2103CEKC J Chassis Frame Cover CCABAA092WJ03 J Cabinet A Ass’y(LC-13E1UW) BG...
  • Page 78 LC-13E1U/UB/UW LC-15E1U/UB/UW CABINET AND MECHANICAL PARTS COTROL PWB 1-14 1-11 1-13 DIGITAL PWB INVERTER PWB 1-10 R/C,LED PWB 1-15 1-13 1-14 ANALOG PWB 1-12 5-12 5-10 5-11 5-14 5-13 5-11 5-17 5-16 5-16 5-15 5-17...
  • Page 79 (LC-15E1U) Not Available – Cabinet A — GCOVA2103CEKB J Chassis Frame Cover GCOVA2020CEZZ J R/C LED Cover (LC-15E1UB) Not Available – "SHARP" Badge — GCOVA2103CEKC J Chassis Frame Cover PSPAGA034WJZZ J Spacer, x4 (LC-15E1UW) PSPAGA035WJZZ J Spacer, x4 GCOVAA083WJKA J Terminal Cover(L)
  • Page 80: Packing Parts

    Part No. Description Code PACKING PARTS SUPPLIED ACCESSORIES (NOT REPLACEMENT ITEM) LC-13E1U LHLDW0109CESA J Cable Clamp, x2 (LC-13/15E1U/UW) SPAKCA162WJZZ – Packing Case(LC-13E1U) — LHLDW0109CESB J Cable Clamp, x2 SPAKCA258WJZZ – Packing Case(LC-13E1UB) — (LC-13/15E1UB) SPAKCA260WJZZ – Packing Case(LC-13E1UW) — QACCD3097CEPA...
  • Page 81: Packing Of The Set

    LC-13E1U/UB/UW LC-15E1U/UB/UW PACKING OF THE SET Operation Manual (TiNS-A156WJZZ) Cable Clamp Polyethylene Bag (LHLDW0109CESA:LC-13/15E1U/UW) (SSAKA0160CEZZ) (LHLDW0109CESB:LC-13/15E1UB) "AAA"size Battery (2pcs) Buffer Material (Top) (SPAKFA092WJZZ:LC-13E1U) (SPAKFA089WJZZ:LC-15E1U) Wrapping Paper (SPAKPA076WJZZ:LC-13E1U) (SPAKPA072WJZZ:LC-15E1U) AC Adapter (UADP-A009WJPZ) AC Cord (QACCD3097CEPA) Packing Case (Accessories) Antenna Cable (SPAKFA095WJZZ)
  • Page 82 LC-13E1U/UB/UW LC-15E1U/UB/UW COPYRIGHT © 2002 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Lc-15e1uLc-15e1ubLc-15e1uwLc-13e1uwLc-13e1ub

Table of Contents