Table of Contents
Advertisement
(8) Disconnect the Harness on the PNL1 PC Board
(CN230).
(9) Release the Harness from Latch Hook.
(10) Disconnect all the Harnesses on PNL1 PC
Board as illustrated.
(11) Remove 2 Screws (X8).
(12) Remove the PNL1 PC Board (2102).
(13) Disconnect the Harness on the PNL2 PC Board
(CN253).
(14) Remove 7 Screws (X8).
(15) Remove the PCB Holder (118).
42
Advertisement
Table of Contents
Troubleshooting
