Section 4: Specifications and Parts List
•
Door Boxes (analog):
•
External Paging Zones:
•
Page Audio Output:
•
Internal Paging Zones:
•
Music Input:
•
Conference Circuits:
•
REJ Recording Jack Units:
1
System Load Factor determines maximum allowable configuration.
Meeting established environmental standards maximizes the life of the system. Refer to the Stan-
dard Practices Manual for further information. Be sure that the telephone equipment is not:
•
In direct sunlight or in hot, cold or humid places.
•
In dusty areas or in areas where sulfuric gases are produced.
•
In places where shocks or vibrations are frequent or strong.
•
In places where water or other fluids comes in contact with the main equipment.
•
In areas near high-frequency machines or electric welders.
•
Near computer, telexes, microwaves, air conditioners, etc.
•
Near radio antennas (including shortwave).
•
DS2000:
A dedicated 110 VAC 60 Hz circuit located within 7 feet of the cabinet is required.
•
DS1000:
A dedicated 110 VAC 60 Hz circuit located within 4 1/2 feet of the cabinet is required.
Cabinets and Key Telephones
•
Temperature: 0-45 C (32-113F)
•
Humidity: 10-95% (non-condensing)
Analog Door Box (DS1000 only)
•
Temperature: -20-60C (4-140F)
•
Humidity: 10-95% (non-condensing)
126 N Section 4: Specifications and Parts List
System Capacities (Continued)
N/A
Conference circuits dynamically allocated, with 8
parties max. per Conference.
1 max. per 34-Button or Super Display keyset
Environmental Requirements
Power Requirements
Environmental Specifications
DS1000
Base:
1
Expansion:
1
Total:
2
1
1
8 (7 and All Call)
1
DS1000/2000 Product Description