Section 2 - Installation
Manual Setup
If you tapped Manual in Step 8, you must connect to the
DCH-S150 directly. Do not close this app.
On your device, go to Settings > Wi-Fi. Select the network called
DCH-S150-xxxx (where xxxx is the last 4 digits of the MAC
address).
Note: For the exact network name (SSID), refer to the Quick Install
card that came with the product.
Tap Next to continue.
The app may ask if you wish to connect to your current Wi-Fi. Tap
Yes or No.
Enter the PIN code and tap Next.
This code is located both on the back of the DCH-S150 and the
Quick Install card.
D-Link DCH-S150 User Manual
11