HP EliteDisplay S230tm User Manual page 12

5. Connect the provided audio cable to the audio input jack on the rear of the monitor and the other
end to the audio output jack on your input device.
6. Plug the round end of the power supply cord into the power supply connector on the rear of the
monitor (1). Plug the power cord into the power supply brick (2) and connect the other end of the
power cord to an electrical outlet (3).
WARNING!
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one
may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from
the electrical outlet, grasp the cord by the plug.
6 Chapter 2 Setting up and using the monitor
To reduce the risk of electric shock or damage to the equipment: