INITIAL SETTING
Setting the clock
1. You can set the clock only when the System is turned off
(on standby.)
Press and hold CLOCK/SLEEP button.
If you have already set the clock before, press and hold
CLOCK/SLEEP button until the clock is flashing.
"0:00" flashes on the display until you set the clock.
2. Adjust the hour and minute.
or
The clock may gain or lose 1 to 2 minutes per month. You
may need to readjust the clock periodically.
To check the current time while the System is
turned on
The time is displayed for a few seconds.
If there is a power failure
The clock loses its settings. You need to set the clock again.
TIMER
The unit turns on and play desired source (DISC/USB/TUNER)
in your desired time.
Before setting the TIMER:
1. Check that the clock is set to the correct time.
If it is not set, you cannot use the TIMER function.
2. For DISC/USB playback: Insert DISC or USB to the unit.
3. For Radio: Set preset memory.
IF you want to exit timer set mode, according to press
the STOP button.
Setting the TIMER:
1. Press POWER 1 button to turn on the unit.
2. In standby mode, press and hold (2 seconds) the TIMER
button to start the clock setting mode.
The "ON TIME" is flashing.
120821_TY_AS100TW.indb 11
3. Press TIMER button.
The "Hour" in flashing
4. Press the PRESET Z or z button to adjust the hour
and press the TIMER button.
Press the PRESET button once to advance the time by 1
hour. Hold it down to advance continuously.
5. Press the PRESET Z or z button to adjust the minutes
and then press the TIMER button.
Press the PRESET button once to advance the time by 1
minute.
6. Press the PRESET Z or z button continues to set
closing time, and press the TIMER button to confirm.
7. Press PRESET Z or z button to adjust the hour and
press the TIMER button.
8. Press the PRESET Z or z button to adjust the minutes
and then press the TIMER button.
9. Press the PRESET Z or z button continues to set
SOURCE, and press the TIMER button to confirm.
10. Press the function button to select the play source
(DISC/USB/TUNER), and then press the TIMER button.
TIMER icon " " will light up to indicate timer setting.
11
12.8.21 4:56:10 PM