Fujitsu Eternus DX60 S2 User Manual page 61

Chapter 5 Installing Optional Products
5.1 Installing Disks
8
■
3.5" disks
Procedure
1
2
3
4
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Set up RAID groups, volumes, hot spares, and Host Affinity settings on the new
disks, as required.
Check that all components of the ETERNUS DX Disk storage system are in
normal status, using the Storage System Status screen of ETERNUS Web GUI.
Remove the front cover.
For details on how to attach the front cover, refer to
Cover" (page 36).
Wear a wrist strap or touch a metal part to discharge the human body's natural
static electricity.
Remove the dummy disk unit from the slot in which the disk is to be installed.
Hook your fingers and push into the holes of the dummy disk unit, and pull it straight out of
the disk slot.
Dummy disk unit
The removed dummy disk unit should be retained for future use.
IMPORTANT
Copyright 2011 FUJITSU LIMITED
"2.3 Attaching and Removing the Front
61
End of procedure
P3AM-5512-02ENZ0