Naming Inputs - Sony HT-DDW2500 Operating Instructions Manual

Naming inputs

You can enter a name of up to 8 characters for
inputs and display it on the receiver's display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
"T. TONE" appears on the display.
3
Press V/v repeatedly to select
"NAME IN", then press
The cursor flashes and you can select a
character.
4
Press V/v to select a character,
then press B/b to move the
cursor to the next position.
If you made a mistake
Press B/b until the character you want to
change flashes, then press V/v to select
the correct character.
Tips
• You can select the character type as follows
by pressing V/v.
Alphabet (upper case) t Numbers t
Symbols
• To enter a blank space, press b without
selecting a character.
5
Press .
The name you entered is registered.
or b.
23 GB