Table of Contents
Advertisement
7.1.2
Installing the RAID controller driver
Windows
Server OS
®
During Windows
To install the RAID controller driver when installing Windows
1.
Boot the computer using the Windows
Server OS Setup starts.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver...
2.
Press <F6> when the message "Press F6 if you need to install a third party
SCSI or RAID driver..." appears at the bottom of the screen.
3.
When prompted, press <S> to specify an additional device.
Windows Setup
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s):
<none>
* To specify additional SCSI adapters, CD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
S=Specify Additional Device
ASUS TS500-E5
Server OS installation
®
ENTER=Continue
Server installation CD. The Windows
®
F3=Exit
®
Server OS:
®
7-5
Advertisement
Table of Contents
