Miele EGW 2060 Operating Instructions Manual page 4

Built-in plate warmer
Hide thumbs Also See for EGW 2060:
Table of Contents

Advertisement

IMPORTANT SAFETY INSTRUCTIONS
Installation, repair and
maintenance work should be
performed by a Miele authorized
service technician. Work by unqualified
persons could be dangerous and may
void the warranty.
Before installation or service,
disconnect the power supply to the
work area by removing the fuse,
"tripping" the circuit breaker or
unplugging the unit. Pull the plug not
the cord.
Use
The plate warmer interior gets very
hot when in use and stays hot for a
while once turned off.
Use heat-resistant pot holders
when removing dishes. Be sure
that they are not damp or wet. Danger
of steam burns!
Pull the drawer out all the way
when removing dishes to avoid
touching hot drawer parts.
Do not let children access the
appliance or its controls. Supervise
its use by the elderly or infirm.
4
Do not use the plate warmer to
reheat, cook or keep food and
drinks warm. The condensation from
food or drinks could lead to moisture
damage in the appliance.
Do not lean or sit on the warming
drawer. This will damage the
drawer which can hold a maximum of
33 lbs (15 kg).
Do not store anything in the
warming drawer. Forgotten items
could melt or catch fire when the
appliance is turned on. Flammable
liquids and materials should never be
stored in, above or under the plate
warmer.
Do not use the plate warmer to
heat the room. Due to the high
temperatures radiated, objects left near
the appliance could catch fire.
Do not use a steam cleaner to
clean this appliance. Steam could
penetrate electrical components and
cause a short circuit. Pressurized
steam may cause permanent damage
to the surface and to components of
the appliance, for which the
manufacturer cannot accept
responsibility.

Advertisement

Table of Contents
loading

Table of Contents