Advertisement
The door panel can be shortened to
match the height of the adjacent
cabinetry.
The measure
equals the space from
the bottom of the washer door to the
bottom of the adjacent cabinet.
Cut the bottom of the door panel with a
jigsaw according to .
Cut the side decor bars with a
hacksaw.
34
^ Open the door.
^ To remove the door panel unscrew
the 10 screws (arrows) from the door
sheet panel.
^ Remove the three decor bars from
the door panel by unscrewing the
screws.
^ Cut the bottom of the
the two
^ Drill four holes into the door panel to
fix the lower decor bar.
^ Install the decor bars and the door
panel.
To install a decor panel, check if it
needs to be shortened.
and
by .
Advertisement
