Electrical Connection - Miele H 6180 BP Operating And Installation Instructions

Electrical connection

CAUTION:
Before servicing, disconnect the
power supply by either removing the
fuse, shutting off the power main or
manually "tripping" the circuit
breaker.
Installation, repair and maintenance
work must be performed by a Miele
authorized service technician. Work
by unqualified persons could be
dangerous and may void the
warranty.
Before connecting the appliance to
the power supply, make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
Only operate the appliance after it
has been installed into cabinetry.
The power cable plug must be
inserted into a suitable outlet that
has been installed and grounded in
compliance with all applicable local
regulations.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Installer: Please pass these
instructions on to the customer.
78
Electrical connection
The oven is equipped with a power
cord approx. 5' 6" (1.7 m) in length with
a NEMA 14-30 P plug ready for
connection to the power supply:
– 120/208 V, 30 A, 60 Hz
or
– 120/240 V, 30 A, 60 Hz
The voltage can be adjusted (see
"Settings -  ").
SAVE THESE INSTRUCTIONS FOR
THE ELECTRICAL INSPECTOR'S
USE.
(NEMA 14-30P, L1, L2, N, G, 30 amp
208/240 VAC)