Electrolux EN19WI30LS Installation Manual page 39

Installation
1. Apply Wall Packing to the rear side of the
remote controller.
2. Connect the remote controller wires to the
separate remote controller cord.
Wall Packing
(take off the paper)
Remote Controller Cord
3. Remove the cover of the remote control,
mark the location of the screw holes, and
drill holes for the wall anchors.
4. Insert the wall anchors, screw the remote
control to the wall and replace the cover.
Remote
Control
Wires
Wall Anchor
Rear Side of
Remote Controller
Phillips Roundhead
Wood Screw
37