Installation Guide
2
Hardware Installation
An AP7131 or AP7131N Access Point installation includes mounting the Access Point, connecting the Access Point
to the network, connecting antennae and applying power. Installation procedures vary for different environments.
Both AP7131 and AP7131N Access Points have the following port designations:
• GE1/POE - LAN port
• GE2 - WAN Port
2.1 Precautions
Before installing an AP7131 or AP7131N Access Point, verify the following:
• Do not install in wet or dusty areas without additional protection.
• Verify the environment has a continuous temperature range between -20° C to 50° C.
2.2 Package Contents
Check package contents for the correct AP7131 Access Point and applicable AP7131 accessories. Each available
configuration (at a minimum), contains:
• AP7131 or AP7131N Access Point (accessories dependent on SKU ordered)
• AP7131 Series Install Guide (this guide, supporting both AP7131 and AP7131N Access Points)
• Wall mount screw and anchor kit
• Accessories Bag (4 rubber feet and a LED light pipe and badge with label for above the ceiling
installations)
Contact Support to report missing or improperly functioning items.
NOTE
Some Access Points ship with a protective cover (facade) or a 6-element
MIMO antenna. The cover disconnects from the Access Point as
illustrated on the next page. When attached, LEDs continue to illuminate
through the cover.
7