D-Link DIR-822 User Manual page 80

Section 3 - Configuration
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that require the use of
traffic control and data priority manipulation.
The following parameters will be available for configuration:
Checkbox:
Tick this option to enable the rule specified.
Name:
Enter a custom name for the rule being created here. This name
is used for identification.
Queue ID: Select the appropriate priority requirement from the drop-
down menu that will be applied to this rule. Option to choose
from are Highest, Higher, Normal, and Best Effort.
Protocol:
Select the protocol used for the application for in the drop-
down menu and it will automatically place it in the Protocol
field.
Local IP Range:
Enter the local IP range used here. This is the IP range of your
Local Area Network. The router's IP cannot be included in this
range.
Remote IP
Enter the remote IP range used here. This is the IP range of the
public network from the Internet Port side. To apply this rule to
Range:
any IP addresses from the public side, enter the range 0.0.0.1 to
255.255.255.254.
Application Enter the application port number used here.
Port:
D-Link DIR-822 User Manual 76