Disassembly Instructions (Also See The Video Clips On Care Point) - Nokia 3100 Service Manual

nokia
C P
ONNECTING EOPLE
Nokia Mobile Phones Customer Care EMEA
Technical Services, Repair Concepts

8. DISASSEMBLY INSTRUCTIONS (ALSO SEE THE VIDEO CLIPS ON CARE POINT)

If not already done protect window to avoid dust and
scratches with a film.
Remove A-Cover as shown in the picture.
Separate the module from the B-Cover and unplug the
display connector carefully by removing UI-Shield from
PWB.
Use the SRT-6 to remove the LCD from the UI-Shield.
Prevent the Key Dome tape from getting dirty.
Service Manual 3100 Level 1&2
PAGE 13 (22)
Confidential
Press the Release Button before removing the C-Cover.
Unscrew the six T6 screws, using the order shown.
assembly, the reverse order and a Torx T6 PLUS
with torque of 20Ncm have to be used.
Separate UI-Shield from PWB carefully. Key Dome is
attached with adhesive tape, which must not be
touched.
Always protect LCD window with a protection film to
avoid dust and scratches.
Copyright 2003 © Nokia Corporation
Approved 1.0
DJk
22.08.2003
For