Powering Up The Pager; Adjusting The Volume - Motorola MINITOR VI User Manual

Powering Up the Pager

Rotate the On/Off/Volume Control Knob
clockwise until you hear a click.
You will hear an
audible beep and/or
vibrate, depending on
the Function Switch
programming,
indicating that the
device is turned on.
If your pager does not
power up, check your
battery. Make sure
that it is charged and
properly attached. If
your pager still does
not power up, contact your dealer.
To turn off the pager, rotate this knob
counterclockwise, beyond the white
volume level indicator, until you hear a
click, unless the Always On feature is
enabled.
For more details on Always On, refer to
"Pager Programming Software (PPS) on
page 19."

Adjusting the Volume

To increase the
volume, turn the
On/Off/Volume
Control Knob
clockwise.
To decrease the
volume, turn this knob counterclockwise.
Note: Turning the knob counterclockwise
beyond the white volume level indicator
(until a click is heard) will turn off the pager.
11
English