Completion Notice Function; Setting Up The Completion Notice - Panasonic DP-C406 Operating Instructions Manual

Completion Notice Function

3Setting up

Setting up the Completion Notice

Ex: Print Job
Basic Procedures
1
Install the Job Status Utility located on
the Panasonic Document
Management System CD-ROM. (See
pages 5 to 9)
2
Confirm that the Panasonic Job Status
Utility icon is shown on the task bar.
Panasonic Job Status Utility Icon
If the Job Status Utility icon
on the task bar, select "All Programs" ->
"Panasonic" -> "Job Status Utility" -> "Job
Status Utility" to activate the Job Status
Utility icon.
The Job Status Utility software will display the pop-up
Completion Notice on your PC screen when finishing the Print,
PC Fax, Copy, and Fax jobs.
The information displayed in the Completion Notice vary
according to the type of job being performed.
3
is not shown
For PC Fax, and PC Print only
Set up the Completion Notice as
described in the column on the right.
For Copy, Fax, and Internet Fax
only
Refer to Setting up the Scanner
Configuration using the
Communications Utility. (See page 27)
Select your PC on the Touch Panel Display
of the machine. Refer to the Completion
Notice of each relevant Operating
Instructions of provided CD-ROM.
25