Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Security Camera
  5. G65
  6. User manual

Sony G65 User Manual

Hd-sdi high speed dome camera series
Hide thumbs

Advertisement

Quick Links

Download this manual
HD-SDI High Speed dome
Camera Series
USER'S MANUAL

Advertisement

loading

Related Manuals for Sony G65

Summary of Contents for Sony G65

  • Page 1 HD-SDI High Speed dome Camera Series USER'S MANUAL...

  • Page 2: Table Of Contents

    WARNING CONTENTS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN 1. Precaution............1 OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR 2. Features...............2 OTHER OPENINGS ON THE EQUIPMENT. 3.

  • Page 3: Precaution

    -10°C to +50°C(14°F to 122°F) and a humidity below Camera Features: ® 90%. The input power source is 24V AC, 50/60Hz and requires 1000mA. - 1/2.8" Sony Exmor CMOS Sensor Use the outdoor models within -20°C to +60°C(-4°F to 140°F) and a humidity below - Full-HD HighResolution up to 1080p 30fps 90%.

  • Page 4: Packing List

    3.PACKING LIST 4.INSTALLATION Indoor Safety Instructions before starting High Speed dome Typ1 Camera Series USER'S MANUAL - Do not install and operate this appliance in a flammable and explosive environment. - Make sure that the installation is done according to the local electricity safety regulation of your country.

  • Page 5: Installation

    Using optional accessories The High speed dome camera can be connected to various optional The wiring cable of G65 and G70 provides connectors for power supply, video and I/O accessories through the standard connector types, which simplifiy the cable handling interface and avoids possible mistakes.
  • Page 6 4.INSTALLATION 4.INSTALLATION Star-Connection Installing the core unit to base board. The star-form connection is mostly used. it enables the connection of different dome The HD-SDI HSD Series core unit and base board are packed seperatly, in order to be protected through the transportation. After unpaking and during the installation, the cameras in longer distance.

  • Page 7: Operation

    5.OPERATING THE SPEED DOME 6.OSD Initial Screen OSD Menu After powering up, the camera will enter the FIRMWARE V1.0 The HSD Series are equipped with new OSD-Menu function. All operation functions and self-test mode and display the status screen( Protocol: FACTORY camera related settings can be changed or modified here.
  • Page 8 6. OSD - MAP 6.OSD - System Setting System Setting SYSTEM SETTING In system setting menu, you can modify operation and EDIT DOME LABEL display setting, such as dome label, temperature and INITIAL INFO display of various value on the operational screen. DISPLAY SETUP MOTION CLEAR...
  • Page 9 6.OSD - Motion, Clear OSD - Camera Setting Motion control PASSWORD SETUP MO TI ON Password setup LD PASSWORD : ****** AUTO FLIP AUTO FLIP : Auto. Image flip in tilt range from 90° to NEW PASSWORD : ****** You can change password to access the OSD menu. PROPORTION PAN 180°...
  • Page 10 PROGRAM PATTERN: Starts recording the pattern PRESET NUMBER: G65-70 Series supports up to when selected. you can perfome PTZ movement for 128 presets. The number can be selected from 0 to recording and shall not exceed 180 sec. Press IRIS- 128.
  • Page 11 6.OSD - Zones and Privacy Mask 6.OSD - Alarm Setting Tour Privacy Mask ( Window Blanking) WINDOW BLA N KI NG EDIT TOUR Tour is an auto-run through selected preset Privacy Mask is used to protect the privacy area not to be points with definable pause time.
  • Page 12 7. Dome Address & Protocol Protocol setting In order to establish a connection for telemetric control with keyboard device. you need to setup the dome address and protocol. The HSD series are capable with multiple communication protocol. The setting can be changed through the DIP-Switches on the rear side of the connector boards as Illustrated.
  • Page 13 7. Address ID, 1 to 67 7.Address ID, 68 to 135 Switchnumber (Sw1) Switchnumber (Sw1) Switchnumber (Sw1) Switchnumber (Sw1) Bit 1 2 3 4 5 6 7 8 Bit 1 2 3 4 5 6 7 8 Bit 1 2 3 4 5 6 7 8 Bit 1 2 3 4 5 6 7 8 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 0...
  • Page 14 7. Address ID, 136 to 203 7. Address ID, 204 to 255 Switchnumber (Sw1) Switchnumber (Sw1) Switchnumber (Sw1) Switchnumber (Sw1) Bit 1 2 3 4 5 6 7 8 Bit 1 2 3 4 5 6 7 8 (Bit)1 2 3 4 5 6 7 8 (Bit)1 2 3 4 5 6 7 8 0 1 0 1 0 1 0 1 0 0 0 1 0 0 0 1...