Haier HCC2320AES Installation Instructions Manual page 8

Figure 10
8
Figure 11
THE CONDUIT IS 3 FEET LONG
The junction box, must be located where it will
allow considerable slack in the conduit for
serviceability.
Important:
For solid surface material installations such as
x
Surel™ and Corian
manufacturer. Apply heat reflective tape such
as Scotch Aluminum Foil Tape #425 or #427
®
around the cutout so that it folds over on the top
and sides.
Do not wrap the tape underneath the cooktop.
x
Be sure the tape extends beyond the outermost
flange of the cooktop. All corners should be
covered with tape.
Installation Manual
ENGLISH
WARNING
®
, consult with solid surface