Table of Contents
Advertisement
Using the Cable Modem
Rear Panel
8
1
DC+5V/2A
1. DC +5V/2A Power Input Jack
The provided power adapter converts AC power to DC power for use with this jack. Power
supplied through this jack will supply power to the cable modem.
2. RF Connector
The connector may be located right next to the power input jack or the serial port. The F-
Type female connector allows cable data communication between the cable modem and
the cable service provider through a coaxial cable.
3. Serial Port
The 9-pin D-sub serial port supports the RS-232 terminal interface for advanced cable
modem management.
4. Reset Switch
The reset button, when pressed, resets the cable modem without the need to unplug the
power cord.
5. USB Port (optional)
The optional USB port allows the modem to be connected to your computer through the
USB interface.
6. 10/100-BaseT LAN Port
The LAN port supports 10Base-T or 100Base-TX networks. This port allows your PC or
Ethernet hub to be connected to the cable modem through a CAT.5 LAN cable.
2
3
Cable
Console
4
5
6
Reset
USB
10/100-BaseT
Advertisement
Table of Contents
