User's Guide
Other Faxing Problems
Cannot Make Calls on the Connected Telephone
Connect the telephone to the EXT. port on the printer, and pick up the receiver. If you cannot hear a dial tone
through the receiver, connect the phone cable correctly.
Related Information
"Connecting Your Phone Device to the Printer" on page 64
&
Answering Machine Cannot Answer Voice Calls
On the control panel, set the printer's Rings to Answer setting to a number higher than the number of rings for
your answering machine.
Related Information
"Fax Settings" on page 20
&
"Settings for the Answering Machine" on page 70
&
Sender's Fax Number Not Displayed on Received Faxes or the
Number Is Wrong
The sender may not have set the fax header information or may have set it incorrectly. Contact the sender.
Other Problems
Slight Electric Shock when Touching the Printer
If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.
Operation Sounds Are Loud
If operations sounds are too loud, enable quiet mode. However, this may slow down printer operations.
❏ Windows printer driver
Select On as the Quiet Mode setting on the Main tab.
❏ Mac OS X printer driver
Select System Preferences from the
select the printer. Click Options & Supplies > Options (or Driver). Select On as the Quiet Mode setting.
Solving Problems
menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
118