GE Monogram ZGP304NRSS Dimensions And Installation Information

ZGP304NRSS (Natural Gas)
ZGP304LRSS (Liquid Propane)
GE Monogram
Dimensions and Installation Information (in inches)
All Professional Ranges are factory set for natural or liquid
propane gas. The correct model should be ordered for the
installation situation.
Note: Conversion kits are included with the range if the wrong
gas type was ordered. High Altitude kit, WB28K10553 for
operation above 6,000 feet, is also available. The kits must be
installed by a qualified service technician at additional cost.
Installation Information
Before installing, consult installation instructions packed with
product or online at Monogram.com for current dimensional
data.
A suitable 30" or wider vent hood is recommended for
installation over this range.
Advance Planning
Refer to dimensional drawings
for appropriate placement and
necessary clearances when
planning the installation.
• Working areas adjacent to the
range should have 18" minimum
clearance between countertop
and cabinet bottom.
• Clearance between range and
side wall or combustible material
must be at least 12" on each side.
• Installation must conform with
local codes. In the absence of local
codes, the range must comply
with the National Fuel Gas Code,
ANSI Z223.1-990.
For answers to your Monogram,
GE appliance questions, visit our website at
®
geappliances.com or call GE Answer Center
service, 800.626.2000.
30" All-Gas Professional Range with 4 Burners
®
GE Profile or
® ™
®
Listed by
Underwriters
Laboratories
Specification Revised 4/11
130560