Control-panel assembly
WARNING!
1.
Before proceeding, remove the following:
Control-panel top-cover. See
●
2.
Press forward on the control-panel sub-cover and remove the sub-cover.
Figure 1-79
3.
Remove the ground screw and wire, the screw holding the control-panel to the tray, and one FFC.
Figure 1-80
4.
Slide the control-panel assembly forward and remove.
ENWW
ESD sensitive component.
Control-panel top-cover on page
Remove the control-panel (1 of 3)
Remove the control-panel (2 of 3)
57.
Removal and replacement procedures
59