Advertisement
How to set WEEKLY TIMER
PRESET
1. Press
to enter WEEKLY TIMER setting.
2. Press
to select desired day in sequence.
The sequence of day symbol appears on the LCD
SU
MO
3. Press
to select the program number.
• The program 1 is ready for setting while
pressed PG-1 appears on the LCD.
• Press
to change the program number in the
sequence program 1 to program 4.
TEMP.
Blink
TU
WE
TH
FR
SA
WEEKLY SUMO
TUWETHFRSA
(All day)
is
PG-1
PG- 2
PG-
3
PG-
4
4. Press
or
• The time can be set between 0:00 and 23:50 in 10
minute intervals.
• Press and hold the button to change setting time for 1 hr.
• Only one of ON or OFF timer can be set on each
program.
ON timer display
* OFF timer is used to stop the air conditioner only. The
display does not show Operation mode, Temperature,
Fan speed and others.
5. Press
to select desired operation.
6. Press
or
TEMP.
• The temperature can be set between 17°C and 30°C.
7. Press
to select the desired fan speed.
8. Add operations, if required.
• Press
to use 8°C operation.
• Press
to use ECO operation
• Press
to use Hi-POWER operation.
9. Adding or editing the program.
The program can be set to perform on all the required days
until
is pressed to confi rm the setting 10.
If adding or editing a program is required, please repeat
steps 2 - 8 before setting confi rmation.
10. After adding or editing, press
Weekly timer
running
Next program
Timer ON
or OFF
* Point remote control at air conditioner receiving module
then, press SET button until you hear the "PiPi" sound.
This means the setting operation has been completed.
As the air conditioner is receiving the signal, you will hear
separate "Pi" sounds corresponding to the number of days
in the selected setting.
An incomplete setting is indicated if the TIMER lamp is
blinking. Press
4
to select the desired time.
OFF timer display*
to select desired temperature.
to confi rm the setting*.
Operating Mode
Display after
pressing SET
button
Next operation
Operating Temperature
time
and Fan speed
twice.
Advertisement
