Tone Length—Busy Tone / Dnd Tone - Panasonic KX-TDA200 Programming Manual

4.4 [2-3] Timers & Counters
Recall—Disconnect after Recall
Specifies the length of time after an extension with a CO line call on hold receives a Hold Recall tone that the
held call is disconnected.
Default
30 min
Value Range
1–30 min
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
3.1.2 Call Hold
Tone Length—Busy Tone / DND Tone
Specifies the length of time that a busy/DND tone is heard when a call is made to an extension in busy status
or DND mode. A reorder tone will be sent when this timer expires. (For a call through DISA, the call will be
disconnected when this timer expires.)
Default
10 s
Value Range
0 (continuous)–15 s
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
4.1.9 DND (Do Not Disturb)
Tone Length—Reorder Tone for PT Handset
Specifies the length of time that a reorder tone is heard when using a PT handset. The PT will return to idle
status when this timer expires.
250 PC Programming Manual Document Version 2008-11