Table of Contents
Advertisement
501971102025_GB:Layout 1
Use
CONTROL PANEL
A:
START/STOP starts/stops the selected cycle
B1: selects the timer-controlled blast chilling cycle with a pre-set duration of 1:30 (hours:minutes). Press
repeatedly to set the duration of the cycle to 0:30 (hours:minutes) or to 1:00 (hours:minutes).
B2: selects the temperature-controlled blast chilling cycle (i.e. controlled by the core probe).
C1: selects the timer-controlled shock freezing cycle with a pre-set duration of 4:00 (hours:minutes).
Press repeatedly to set the duration of the cycle to 1, 2 or 3 hours.
C2: selects the temperature-controlled shock freezing cycle (i.e. controlled by the core probe).
D:
selects the "BEVERAGE CHILLING CYCLE". Press repeatedly to set the duration of the cycle to
5,10 or 15 minutes. The cycle duration appears on the display (H).
E:
This symbol indicates the timer-controlled mode (with duration set by the user)
F:
This display shows the set duration of the timer-controlled cycle or the actual temperature
measured by the core probe in temperature-controlled mode.
H:
This display shows the air temperature inside the chamber.
G:
This symbol refers to the "core probe" mode.
L:
This symbol refers to the "air temperature gauge" mode.
1.3.1
14-01-2008
16:28
Pagina 9
E
F
A
B1
B2
9
G
H
L
C1
C2
D
Advertisement
Table of Contents
