Toshiba 58L7350U User Manual page 34

4 ConnectingYourTV
Connecting remote IR devices
To connect the IR blaster cable:
1 Locate the infrared sensor on the front of your device. This sensor
is marked on some devices. If you are having issues locating the
device's infrared sensor, see "If you cannot locate the device's
infrared sensor:" on page 35.
2 Align one of the IR blaster cable's wands approximately 1 inch
away from the infrared sensor on the front of the device and attach
it using double-sided mounting tape. If you have a second device,
attach the second wand in a similar manner.
NOTN
If youdo not havea second device,coilthesecondwandwith a rubber
bandandleaveit behindtheTV.
3 Plug the IR blaster cable's plug into the TV's IR Blaster Out
terminal.
Front ol IR-controlled DVD player (for example)
BCk
Front ol IR-controlled audio device (for example)
,nfrared-L =, m= mn
sensor _f_.,
f
IR blaster cable wand TV bacl_ panel
(approx. 1 inch from device) li_J']-]
Dual-
wand IR
1_ laster
cable
(Sample Ilhtstrafion) L 7350 Series--Using the IR bhtster OUT terminal