Toshiba 65L7300U User Manual page 18

Pictureand SoundControls 107
Adjusting the audi
Selecting the optical audio outputformat
You can select the optical audio output format when you connect a
Dolby _ Digital decoder or other digital audio systems to the TV's
DIGITAL AUDIO OUT terminal.
Audio Format
1 Press the SETUP button.
2 Select Sound > Digital Audio Output > Audio Format and press
the OK button.
3 Press the A/V (arrow) buttons to select Auto or PCM.
4 Press the EXIT button.
Audio Delay
1 Press the SETUP button.
2
Select Sound > Digital Audio Output > Audio Delay and press the
OK button.
Press the
Auto:
Manual:
A/V (arrow) buttons to select Auto or Manual.
This mode automatically adjusts the audio timing to meet
the video timing.
The time lag might be large between the image and sound
depending on the connected equipment (amplifier etc.). In
that case, select Manual.
You can manually adjust the audio signal timing to meet
the video signal timing.
4 Press the EXIT button.
Delay Adjustment
1 Press the SETUP button.
2 Select Sound > Digital Audio Output > Delay Adjustment and
press the OK button.
3 Press the "I/I* (arrow) buttons to adjust the audio signal timing (0 -
250ms) to meet the video signal timing.
4 Press the EXIT button.
NOTN .:° Thisfeature is grayedoutwhenAudio Delayis in Auto.
¢ A time lagwill occurwhenthevideosignalor audiosignalis changed.
Adjustthetiming accordingly.
¢ Whenadjustingthetiming,turn downthevolumeof theAV equipment
usedasfaraspossible.