Setting the temperature limits
The wired remote controller can be set to allow only a certain
temperature range. By setting the lower and upper temperature
limits, the set temperature can be selected only within the set
range. This function may be used for energy savings.
1
Press the
button for 5 seconds to enter the setup
mode.
Result:
The wired remote controller will enter the setup
mode and the menu will dispaly
2
Press the
Result:
The wired remote controller will display
on the menu.
3
Press the
button to enter the temperature limit setup
mode.
4
The default lower and upper limits are 16°C and 30°C.
Set the lower limit first by pressing the
followed by the
Note
Press the
limits.
Even if the lower limit is 16°C, the lowest
temperature that can be set in cooling mode
is 18°C.
Press the
temperature limits setup.
5
Press the
button to exit the setup mode.
button.
button and set the upper limit.
button again to set the upper
button to cancel the
.
button
21
E-