Connections; Connecting To A Tv; Connecting To The Digital Amplifier/Receiver; Connecting To Home Network Via Wired Router - Toshiba BDX2550KB Owner's Manual

3 Connections

Make the following connection to use this product.

Connecting to a TV

Connect a HDMI cable from the HDMI
on this player to the HDMI
An HDMI cable carries both video and audio
signals. If you wish to use TV speakers, you do not
need to make an additional audio connection.
HDMI cable
(not supplied)
(Sample Illustra on) Connec ng to a TV - HDMI cable

Connecting to the digital amplifier/receiver

Route the sound from this player to other device to
enhance audio output.
Connect a coaxial cable from the COAXIAL jack on
this product to the COAXIAL jack on the device.
Digital audio coaxial cable
(not supplied)
Digital AV receiver/amplifier
(Sample Illustra on) Connec ng to a digital AV receiver/amplifier

Connecting to Home network via wired router

Connect the network cable from the LAN jack on the
product to the LAN jack on the network system.
LAN cable
(not supplied)
(Sample Illustra on) Connec ng via a wired router
output jack
TM
input jack on the TV.
TM
hub or broadband router
Notes:
• Do not connect a modular phone cable to the LAN jack.
• Follow the connec on configura ons instruc ons
from your telecommunica on carrier or Internet
service provider.

Connecting USB device

Connect the USB device to the front side of the
player. The USB input supports USB flash drives
(some Flash drives may not be compatible).
USB flash drives can be used to enjoy playback of
Photo/Video/Music files (shown in compatible file
formats table), and
available).
USB device
(Sample Illustra on) Connec ng a USB device
Notes:
• To enjoy BD-Live™ bonus content, as your local storage,
use a 1 GB or larger USB flash drive.
• For some Blu-ray discs with BD-Live
TM
may need to plug in the USB flash drive before
loading the disc. Otherwise, the disc may not playback.
• TOSHIBA does not guarantee 100% compa bility
with all USB flash drives.
• The manufacturer will not be responsible for any
damage or data loss on USB flash drives.

Connecting Power

After all the AV connections are made, connect the
AC power cable to the wall socket.
• The product is ready to be set up for use.
Notes:
• Before connec ng the AC power cord, ensure you have
completed all other connec ons.
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the
back of the unit.
• The type plate is located on the back of the unit.
software upgrades (if
feature, you
TM
9