Updating The Firmware - Digital Bolex D16 User Manual

UPDATING THE FIRMWARE

When a new version of the D16 firmware is released, you will
want to update your camera.
Before you begin, make sure you have downloaded our BOLEX
UTILITIES program and the latest version of your firmware,
always available on our website at www.digitalbolex.com/
downloads.
(Check which version of the firmware you have currently
installed in the "s M
ettings enu
usb2
accessing the slot
on the unDeRsiDe of the
.
caMeRa
" on Page 25.)
On the bottom of the camera is a small hatch attached via 4
small screws. Using a philips head screwdriver, unscrew this
hatch to expose the USB2 port. This port is what you will use to
upgrade your firmware.
To start, move the switch on the lefthand side up towards the
lens port to engage Update Mode.
Connect the USB2 cord to the computer, and open our BOLEX
UTILITES program. (If you do not currently have this installed,
please see "i s
nstalling the oftwaRe
Hold the power button for 3 seconds to turn on the camera.
Keep the camera connected to an external power supply to
ensure the camera does not lose power during your upgrade.
UPDATING THE FIRMWARE
" on Page 38.)
26