How To Operate The Display/User Interface; General Information - SR Suntour Owner's Manual

SR SUNTOUR OWNERS MANUAL
To protect the pins of your docking station against moisture and dirt it is is equipped with a cover,
which can be slid over the pins. Always cover the pins after you take o the display!
Do never expose the pins to any kind of metal like tools, coins or hairpins.
This could result into a short circuit and might cause permanent damage. As a result of
this massive heat might build up, this could result into a burning of the display unit.
More over you might expose yourself to an electric shock.
Make sure to turn o the display before removing it
Removing the display before turning o may result into a failure of the system.
The display will save all data, like trip distance and average speed, on a ash memory.
Removing the display before it has been turned o may result in a loss of stored data.
Never expose the display to any kind of static electricity or strong radio waves as it

How to operate the display/user interface

General Information

The user interface / display is located on the handlebar. When the system is switched on by using
the on/o -switch, you can choose among the options below.
Always close the cover after removing the display
might erase all data on your display.
HESC components
11