Remote Controller Specifications; Performance Feature; Function Buttons - Carrier split room air conditioner remote control Manual

Remote Controller Specifications

Model
R14A/(C)E, RG14A1/(C)E, RG14A2/(C)EF.
Rated Voltage
3.0V(Dry batteries R03/LR03×2)
Lowest Voltage of
2.4V
CPU Emitting Signal
Signal Receiving
8m (when using 3.0 voltage,
Range
it gets 11m)
。
Environment
-5 C 60 C(
~

Performance Feature

1. Operating Mode: AUTO, COOL, DRY, HEAT(Cooling only
model without), and FAN.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 17 C~30 C(62 F~88 F).
4. Full function of LCD (Liquid Crystal Display)
Carrier
AUTO COOL DRY HEAT FAN
SET TEMP.
CLOCK
TIMER ON
TIMER OFF
SPEED
AUTO LOW MED HIGH
MODE
1
ON
TEMP.
2
OFF
3
FAN SPEED
4
SLEEP
AIR DIRECTION CLOCK
5
SWING TIMER
6
LED CANCEL
TURBO
7
RESET F/C
8
。
O O
23 F~140 F )
。 。
O O
Model: R14A/E,
R14A/CE.
Buttons: These three button is
9
disable for model R14A/(C)E.
10
11
12
13
15
3

Function buttons

MODE Button
1
Each time the button is pressed, the operation
mode is selected in a sequence of following:
Carrier AUTO
NOTE: Heat mode is for Cooling & Heating models only.
AUTO COOL DRY HEAT FAN
SET TEMP.
CLOCK ON/OFF Button
2
TIMER ON
Operation starts when this button is pressed
TIMER OFF
and stops when this button is pressed again.
SPEED
AUTO LOW MED HIGH
3 FAN SPEED Button
MODE
Used to select the fan speed in four steps:
1
ON
TEMP. 9
2
OFF
3
FAN SPEED AIR DIRECTION Button: Press this button to
4
10
change the swing angle of louver and set the
4
11
SLEEP
AIR DIRECTION desired up/down airflow direction. The louver
CLOCK
5
12 swings for an angle of 6 for each press.
SWING
TIMER
13
6
SWING Button
5
LED CANCEL
TURBO
7
Used to stop or start auto swing feature of
RESET F/C
8 the louver. Press it again to stop the movement.
IONIZER
14
LED Button
15 6
Press this button to clear the digit display in
the air conditioner, press it again to activat it.
(NOTE:there is no reation to some air
conditioners without digital display when you
press the LED button.)
RESET Button
7
Model: RG14A1/E,
Once the recessed RESET button is pressed,
RG14A1/CE.
all of the current settings will be cancelled and
the controller will return to the initial settings.
F/C Button
8
Used to select/display temperature settings in
either Celsius or Fahrenheit . Press this button
to select either the Celsius or Fahrenheit scale.
TEMP. Button :
9
Push the
temperature setting or to adjust the TIMER
in a clockwise direction. Push the
to decrease the indoor temperature setting
or to adjust the TIMER in a counter-clockwise
direction.
COOL DRY HEAT FAN
Auto Low Med High
, , ,, , , ,,
button to increase the indoor
button
4