Setting The Time/Date - Christopher Ward C61 Trident PRO AUTOMATIC Owner's Handbook Manual

oPerATIng InsTruCTIons

seTTIng The TIme/dATe

• first unscrew the crown anti-clockwise from
the case to position
Wind in a clockwise direction to re-power
the watch.
• Pull gently into position
correction, turn in a clockwise direction.
• Pull gently into position
used for handsetting, and stopping of the
second hand. for precise time setting it is
recommended to pass beyond the desired
minute and to set the hand backwards.
PLeAse noTe: date correction should not be
carried out between 20.00 hr and 02.00 hr as
the watch gearing will already be aligning
itself to change the date. The crown should
always be pushed in after adjustment, and
it is best to do so from position
advancing beyond the desired date.
You must always ensure the crown is fully
tightened before any use in water.
10
1
for winding in power.
2 . for rapid date
3
. This position is
3
to avoid
1 2 3