Remington Protect & Shine H-1095 Use And Care Manual page 3

™
Protect & Shine Steam Hairsetter
Get Ready
If you are using steam,open the cover and
follow step #3 in the Operating Instructions
section. CLOSE COVER so the mist that forms
during heating will not escape. CLOSE COVER
for heating without steam too.Plug cord into
outlet. • Allow Protect & Shine™ to heat for
about 10 minutes.When the ready-dot turns
dark,the rollers are ready to use.
Get Set
• Hair should be dry or only slightly damp,
never wet. For looser curls,put more hair on
each roller. • Section hair and place roller at
hair ends.Gently wrap the ends of your hair
around the roller and then continue to firmly
roll the full length of the hair in the direction
of desired style.Place a clip over the roller to
secure roller. • Continue to set entire head.
Unplug the unit when done.• Leave rollers in
place for about 5 minutes.Each type of hair and hair style requires a dif-
ferent amount of setting.The longer the roller is left in,the more firm the
curl.Decide how long you want to keep the rollers in place to get the
curl you want.Rollers will remain curling active for 10 minutes.
• Remove rollers when ready, starting with
rollers you placed in first.Remove each clip
and roller gently. Unwind,never pull.Let each
new curl spring back into position and cool for
a minute.
Go!
•Just brush and style your hair and enjoy
long lasting curls.
Be Kind To Your Hair With
Kindness ® Clips From Remington
Kindness ® Clips hold in gentle heat for long-lasting
curls. Use with any size, any brand of rollers;
Steam, Mist or Dry.
To order clips-see the accessory order form.
®