Updating The Firmware - Zoom Multistomp MS-70CDR Operation Manual

1
To update the firmware
1. While pressing both the up and down cursor
keys, use a USB cable to connect the USB
connector to the computer.
While pressing
both
The FIRMWARE UPDATE
screen appears.
2. Launch the firmware update application on
your computer, and execute the update.
NOTE
is being updated.
HINT
to use the application.
3. Confirm that the firmware has been updated.
When the
"Complete!" appears on the display.
Disconnect the USB cable.
HINT
Updating the firmware will not erase saved patch memories.
has finished updating,

Updating the Firmware

23