APPLICATION
The Q7002 Interface Modules allow controllers with an
otherwise incompatible signal to control an Economizer Logic
Module or Direct Coupled Actuator.
Copyright © 1998 Honeywell Inc. • All Rights Reserved
Q7002A,B,C Interface Modules
FEATURES
• Available with either enclosure or snap-track mount.
• 24 Vac or 24 Vdc power.
Q7002A Economizer Interface Module
• Accepts the economizer signal from a W7100 or W973.
• Provides an spdt relay output to an Economizer Logic
• Includes LED indication of relay status.
Q7002B Universal Analog Interface Module
• Accepts dc voltage, current, or resistive input.
• Provides either a voltage or current output for an
• Inputs and outputs are jumper-selectable and include
• Output is jumper-selectable direct- or reverse-acting.
• Includes reference voltage and current to power an
Q7002C Pulse-to-Analog Interface Module
• Accepts a pulse-width modulation (PWM) signal.
• User-selectable PWM time base.
• Positive or negative input reference.
• All ranges have 255-step resolution.
• Provides an analog output (either voltage or current)
• Six-hour memory.
• Multiplex mode enables one PWM signal from a
• Inputs and outputs are jumper-selectable and include
Application ......................................................................
Features ..........................................................................
Specifications ..................................................................
Ordering Information .......................................................
Installation .......................................................................
Settings and Adjustments ...............................................
Module (for example: W6215, W7215, and W7460).
actuator.
adjustable zero and span.
input device or sensor.
for an actuator.
Building Automation System (BAS) controller to
address and control up to eight interface modules.
adjustable zero and span.
PRODUCT DATA
Contents
1
1
2
2
4
6
63-2551